Main trade-off
Clorox Large Room True HEPA
Auto follows a particle reading rather than a user-selected minimum room-air-change target.
Head-to-head
Choose Clorox 11010 for PM2.5-triggered fan changes or a smoke-CADR target above 143 and at most 206 CFM. Choose Core 300-P when 143 CFM suffices, manual control suits you and its complete original-filter kit costs less. Both ratings require maximum speed and clear airflow, not Auto or Sleep. Levoit needs 15 inches on all sides. Clorox excludes greasy kitchens, open fires and oil or chemical areas. Neither establishes hazardous-gas protection or the rated output at a quiet setting.
Before you choose
A closed 300-square-foot study with an 8-foot ceiling needs 200 CFM for a chosen five-air-change target. Clorox’s 206 CFM clears that calculation at maximum speed, while Levoit’s 143 does not. Auto or Sleep cannot be substituted. Below 143 CFM both qualify, and above 206 neither does. This is filtered-air sizing, not ventilation or a health guarantee.
What this is based on
Calculation: 300 × 8 × 5 ÷ 60 = 200 CFM. It compares manufacturer smoke CADR with an explicit sizing target, not a measured room result.
Main trade-off
Auto follows a particle reading rather than a user-selected minimum room-air-change target.
Main trade-off
No automatic particle-triggered fan change is documented for the base Core 300-P.


Compare rated particle airflow, automatic fan response and the placement space these two purifiers need before choosing for your room.
These are plausible alternatives for a bedroom or study where you want local controls rather than an app. The useful questions are how much rated particle airflow the room needs and whether the fan should respond to particles without a button press. They are separate decisions.
Winner by situation
At a 200 CFM sizing target, Clorox clears the calculation only at its rated maximum speed with clear airflow. Levoit’s 143 CFM cannot. Auto is not a 206 CFM promise, and the Clorox location must stay dry and exclude grease, open fires and oil or chemicals.
Clorox adjusts its fan from the onboard PM2.5 reading. Levoit leaves speed selection to you. Accept changing airflow and a safe, clear location away from greasy kitchens, open fires and oil or chemicals, rather than treating Auto as a fixed room-air-change setting.
Both remain candidates at a 143 CFM target, using maximum-speed ratings. Core 300-P becomes the saving only if its complete original-filter kit actually costs less, manual control suffices and 15-inch all-side clearance works. Sleep is not established at that rate.
Neither maximum-speed rating establishes output at your required quiet or automatic setting. Seek measurements at that exact setting. A target above 206 CFM also exceeds both, and a particle rating or PM2.5 display does not establish protection against gases.
Levoit needs 15 inches of clearance on all sides. No evidence here establishes Clorox’s suitability inside the shelf. Do not block the inlets or outlet, and retain underside filter-service access. Find a different location before buying.
What matters in practice
A closed 300-square-foot study with an 8-foot ceiling needs 200 CFM for a chosen five-air-change target. Clorox’s 206 CFM clears that calculation at maximum speed, while Levoit’s 143 does not. Auto or Sleep cannot be substituted. Below 143 CFM both qualify, and above 206 neither does. This is filtered-air sizing, not ventilation or a health guarantee.
Calculation: 300 × 8 × 5 ÷ 60 = 200 CFM. It compares manufacturer smoke CADR with an explicit sizing target, not a measured room result.
Particle-triggered adjustments can spare trips to the Clorox controls, but the fan may slow as its PM2.5 reading falls. That makes Auto a different job from maintaining a fixed filtered-air target. If you prefer a steady manual speed, the sensor loses its value and a lower-priced Core 300-P remains relevant when its maximum-speed 143 CFM rating and placement fit.
The Clorox manual ties Auto to a particle sensor. Levoit’s exact base-model instructions offer manual speeds and Sleep, not the app and sensor features of 300S.
Levoit’s small body does not qualify it for a tight shelf: it still needs 15 inches on every side. Both need open airflow and underside filter-service access. No numerical Clorox clearance establishes that it fits a narrower opening. If neither can breathe or be serviced at the chosen spot, change the location before buying.
The exact operating and filter-care instructions take precedence over the closed cabinet dimensions.
Try your real numbers
The result checks hard limits only. Preferences stay out of the calculation.
206 CFM of verified clean-air delivery gives about 5.2 air changes per hour here. The 5 ACH target needs 200 CFM.
143 CFM of verified clean-air delivery gives about 3.6 air changes per hour here. The 5 ACH target needs 200 CFM. Use the original filter at maximum speed. Sleep and other replacement filters are not rated here.
This uses maximum-speed, pollutant-specific CADR and a five-air-changes-per-hour target. Quieter settings deliver less clean air. It does not substitute raw airflow or a one-change coverage claim.

Clorox, 11010
Clorox 11010 offers 206 CFM rated smoke-particle airflow and PM2.5-based Auto control. Auto can reduce fan speed, so it is not a fixed-flow promise. Keep airflow clear and exclude greasy or chemical-storage locations.

Levoit, Core 300
Core 300-P provides 143 CFM rated smoke-particle airflow with manual speeds. It needs 15 inches of clearance on all sides despite its smaller body. Its original-filter rating does not establish Sleep-mode flow.
Meaningful differences
| What changes | Clorox Large Room True HEPA | Levoit Core 300-P | Why it matters |
|---|---|---|---|
| Smoke-particle CADR | 206 CFM rated | 143 CFM rated | Compare the same pollutant rating. These numbers are not promises for Sleep or an automatically reduced speed. |
| Who changes fan speed | PM2.5-based Auto or four manual speeds | Three manual speeds and Sleep | Clorox can react to a particle reading. Levoit requires you to choose a speed. Auto does not hold a chosen room-air-change target. |
| Placement and filter access | Level surface, clear airflow and room to turn over for filter care | 15-inch all-side clearance, clear airflow and underside filter access | The 8.7-inch Levoit body still needs operating space. Neither should be selected by cabinet width alone. |
What you give up
Recommendation switch
Choose Clorox Large Room True HEPA. The extra capacity is useful only with maximum-speed operation and unobstructed airflow in a dry, level location away from grease, open fires and oil or chemicals. Clorox Auto cannot guarantee the 206 CFM maximum.
Choose Clorox Large Room True HEPA. Its PM2.5-triggered Auto can spare manual adjustments, provided variable airflow is acceptable and placement is dry and clear, away from grease, open fires and oil or chemicals. It is not a fixed room-air-change control.
Choose Levoit Core 300-P. The saving applies only to a lower-priced complete original-filter kit, with manual control, maximum-speed operation and 15 inches of clear space on every side. Sleep does not inherit the 143 CFM rating.
Choose neither. Look elsewhere for a target above 206 CFM, proven quiet-setting output or hazardous-gas protection. Neither particle CADR nor an onboard reading resolves those requirements.
What matters in practice
Size for the airflow you need, then decide whether a particle-triggered fan change is useful. Do not treat Auto as a guaranteed flow setting.
What the facts say
Useful conclusions from the current air purifiers comparison, followed by the checked facts used to reach them.
| Product | Needs matched | Checked facts | Source records |
|---|---|---|---|
| Clorox Large Room True HEPA |
|
| |
| Levoit Core 300-P |
|
|
|
Ready to choose?
Open either model on Amazon to check the current price, customer reviews and delivery options.

Your smoke-CADR target exceeds 143 but not 206 CFM, and you will use Clorox at maximum speed with clear airflow. Auto does not guarantee that output. The dry, level location must exclude greasy kitchens, open fires and oil or chemical areas. If 143 CFM suffices, capacity alone stops deciding.
You want PM2.5-triggered fan changes and accept variable Auto output, not a guaranteed room-air-change target. Clorox needs dry, level placement and clear airflow away from greasy kitchens, open fires and oil or chemicals. Its sensor adds little if you plan a fixed manual speed.
See price & reviews on Amazon
The original-filter Core 300-P costs less as a complete kit, manual control suits you and 143 CFM at maximum speed meets your room target. Allow 15 inches on all sides with clear airflow. Sleep output is unverified. A need for more airflow or automatic particle response rules it out.
See price & reviews on AmazonLinks open in a new tab.