Clorox 11010 vs Honeywell HPA300: Particle Auto in Clorox or more smoke CADR at Honeywell’s manual Turbo

Check these before buying

• Confirm the white US Clorox 11010 or black US Honeywell HPA300 and the actual supplied filters. Clorox 11011 is the different Alexa-enabled model. Honeywell HPA5300B is a different model with different controls. The HPA300 manual also covers smaller HPA090, HPA100 and HPA200 units, so use its HPA300 filter count and control instructions.
• Check the current exact-model offer, seller, condition, included filters and return terms. Honeywell Store marks its own HPA300 listing discontinued. That does not establish manufacturer-wide production status or whether another seller has stock. This comparison asserts no current price, availability, delivery or extra-filter bundle.
• Use smoke CADR consistently for the examples here. Clorox publishes 206 CFM and Honeywell publishes 300 CFM at the highest fan setting. Their dust ratings are 219 and 320 CFM, and pollen ratings are 232 and 300 CFM, respectively. Do not add the three ratings or substitute a dust figure for smoke. These are particle ratings, not gas-removal rates.
• For an illustrative room 18 feet long, 20 feet wide and 8 feet high, the volume is 2,880 cubic feet. A chosen sizing target of five filtered-air changes per hour requires 2,880 times 5 divided by 60, or 240 CFM. HPA300’s published maximum smoke CADR exceeds that target and Clorox’s does not. Five is a chosen comparison target, not a medical threshold or guarantee of clean air. This calculation is filtered-air sizing, not fresh-air ventilation.
• For a second room 15 feet long, 15 feet wide and 8 feet high, the volume is 1,800 cubic feet. The same chosen five-change target requires 1,800 times 5 divided by 60, or 150 CFM, below both maximum smoke ratings. That keeps both in consideration, but proves nothing about either at a lower speed. Actual mixing, room layout, open doors or windows, ongoing particle sources and filter condition can change results. Neither example sizes multiple connected rooms.
• For Clorox automatic response, power on and select Auto with the Fan button. The sensor chooses among its fan speeds according to the measured PM2.5 level. You can instead choose a manual speed. Its published maximum is not an Auto average or a guaranteed minimum. The onboard reading is not a room-wide air-safety certificate or a gas detector. Wi-Fi and Alexa instructions in the shared manual apply only to 11011.
• For HPA300 maximum-speed use, start the unit with the power control and then select Turbo. The manual says it starts on Low. Tapping Turbo again returns to the previous cleaning setting. Test whether you will accept that operating sound where it will run. This comparison has no matched noise measurements or smoke CADR for quieter settings.
• Use the separate light controls if you want the panel dark. Clorox has On, Dim and Off, while Honeywell’s dimmer can switch its lights off without stopping the purifier. Clorox 11010 offers 1, 4 or 8-hour shutoff and HPA300 offers 2, 4 or 8-hour shutoff. Leave the shutoff timer unset for continuous operation. These timers do not schedule a later start.
• Place Clorox on a level indoor surface, keep its air path clear and keep water away. Do not operate it in a greasy kitchen, near an open fire, or in a garage or other area with oil, solvents, insecticides or other chemicals. Use its supplied adapter. Leave enough access to unplug it, disconnect the adapter, invert it and open the bottom filter cover. No numeric installed clearance is established here.
• Place HPA300 upright on a firm, level, flat indoor surface, with the front facing away from the nearest wall or furniture and no grille blocked. Keep it out of bathrooms, laundry areas and other damp locations, and away from combustible gases or vapors. Connect directly to a working wall outlet without an extension cord or power strip. Allow room to remove the front grille and filters. Remove all filter and prefilter wrappers before operating, install all three Type R HEPA elements with tabs out and attach the Type A prefilter in front.
• For Clorox care, switch off, unplug and disconnect the adapter before inverting and opening the bottom cover. Vacuum the outside of the filter and the interior with a brush attachment monthly, or more often if necessary. Use that documented vacuum-cleaning method rather than assuming the filter can be wet-washed. Do not use detergent, solvents or spray cleaners. Check for clogging, reduced airflow or odors. Its reminder appears after about 4,380 hours and prompts inspection, not automatic disposal. The manual gives a 6 to 12-month replacement guideline, subject to condition. Use the specified 12010 replacement filter and reset the reminder after replacement.
• For Honeywell care, switch off and unplug before opening the front grille. None of its filters are washable. Check them periodically and replace the Type A prefilter around every three months and the three Type R HEPA elements around every twelve months, with condition and use determining the actual interval. Avoid breathing collected dust. Reset the corresponding reminder after replacing that filter. Keep the surrounding area clean and use a dry cloth for the exterior. Filter cost and number of pieces alone do not establish total annual running cost.