Clorox 11010 vs Winix 5510: Particle-triggered Auto or more maximum CADR, neither guarantees both

Check these before buying

• Confirm the white US Clorox 11010 or dark US 120V Winix 5510 and the actual included filters. Clorox 11011 is the separate Alexa model. Winix 5500-2 is a different model, and the shared 5510 manual also covers the different-looking 5520. Check current seller, condition, filter package and return terms. No current price, availability, delivery, extra filter bundle or remote handset is claimed.
• For this comparison use smoke CADR consistently: Clorox 206 and Winix 253 CFM at the highest fan speed. Their separate dust ratings are 219 and 252 CFM, and pollen ratings are 232 and 247 CFM. Do not add pollutants or substitute dust for smoke. CADR is filtered-air delivery, not raw fan airflow, gas-removal capacity or a medical outcome.
• An illustrative room 18 feet long, 20 feet wide and 8 feet high contains 2,880 cubic feet. A chosen target of five filtered-air changes per hour needs 2,880 times 5 divided by 60, or 240 CFM. Winix’s 253 CFM maximum smoke rating clears that sizing check, while Clorox’s 206 CFM does not. Five is a chosen comparison target, not a medical threshold. This is filtered-air sizing, not fresh-air ventilation.
• In a 15 by 15 by 8-foot room, the volume is 1,800 cubic feet and the same chosen target requires 1,800 times 5 divided by 60, or 150 CFM. Both maximum ratings clear that check. Neither is established to deliver 150 CFM in Auto, Sleep or another lower setting. Layout, mixing, open doors or windows, ongoing sources and filter condition affect real results. These examples do not size connected rooms or a whole home.
• For Clorox particle-triggered changes, turn on the unit and select Auto with the Fan button. Its PM2.5 table sets fan levels from the onboard reading. You can instead choose one of four manual speeds. Auto can reduce the speed, so it does not establish a chosen room-wide target or continuous maximum output. The numeric display and colors are not medical-grade measurement, a gas detector or a certificate that the room is safe.
• For Winix, distinguish the odorous-gas Smart Sensor from the ambient-light sensor. Auto chooses Low, Medium or High from the gas reading. Turbo is a separate manual speed. The product page says darkness triggers Sleep and returning light restores Auto. Sleep uses a speed below Low and turns the air-quality LED off. None of those automatic modes has a verified 253 CFM smoke rating here. Odor response is not PM2.5 response or hazardous-gas protection.
• Clorox’s separate Light button provides On, Dim and Off without itself lowering the selected fan. In Auto the particle reading can still change that speed. Winix’s light-triggered Sleep deliberately slows the fan. If your room requires maximum-speed output, choose and check the operating mode you actually use. This comparison has no matched noise measurements and no verified lower-speed CADR.
• Winix Smart phone control needs compatible Wi-Fi and app pairing. Local operation does not require pairing. The Wi-Fi button toggles connectivity, and holding it for three seconds starts pairing. PlasmaWave has its own on/off button. Sleep initially disables it, but it can be turned back on. No separate PlasmaWave-off CADR or automatic restoration of a preferred setting after every restart is established. Clorox 11010 does not gain the 11011’s Alexa features from their shared manual.
• Place Clorox on a level, dry indoor surface with clear airflow and keep water away. Use its supplied adapter. Do not operate it in a greasy kitchen, near an open fire, or in a garage or other area with oil, solvents, insecticides or other chemicals. Leave space to unplug, disconnect the adapter and invert the unit for bottom filter access. No numeric installed clearance is established here. Remove the protective packaging from a replacement filter before installing it.
• Place Winix on a hard, flat, dry indoor surface out of direct sunlight, with 12 to 18 inches from walls for maximum airflow and clear front filter access. Keep its vents clear, do not lay it on its side or place it beneath an electrical outlet, and avoid heat, steam, oily residue and flammable gases. Use 120V and do not plug other appliances into the same outlet or power supply. Before operation, remove the filter wrapping and install HEPA at the back, AOC carbon in the middle and the prefilter at the front.
• For Clorox care, turn off, unplug and disconnect the adapter before inversion. Vacuum the outside of the filter and the interior with a brush attachment monthly, or more often if needed. Follow that method rather than assuming wet washing is permitted. Do not use detergent, solvents or spray cleaners. Its roughly 4,380-hour reminder prompts an inspection, not automatic disposal. Check for clogging, reduced airflow or odors and follow the 6 to 12-month replacement guideline according to condition. Fit a 12010 replacement and reset the reminder after replacement.
• For Winix care, unplug and allow the unit to cool. Clean the prefilter every 14 days with a vacuum or soft brush. Only if excessively soiled, rinse with room-temperature water without soap or detergent and allow at least 24 hours to dry. Do not wash the carbon or HEPA. Their roughly twelve-month replacement interval depends on the environment. Use Filter Q, 1712-0123-00, refit the prefilter and close the front. With the unit on, hold Filter Reset for at least five seconds after replacement. Neither filter count nor a washable prefilter alone establishes annual running cost.