Main trade-off
TP-Link Deco BE67 3-pack
The single 10GbE socket cannot be WAN and a separate 10GbE LAN port at once.
Head-to-head
TP-Link Deco BE67 vs ASUS ZenWiFi BT8: Deco adds a third location and 10Gb, ASUS suits several devices in two rooms
The short answer
Choose Deco BE67 for a 10GbE connection or when three useful node locations are already planned. Choose ZenWiFi BT8 when two nodes fit the home and each wired room needs several local connections. Both provide tri-band Wi-Fi 7, so the supplied unit count, port allocation and existing mesh family matter more than the shared generation label.
Before you choose
The reasoning and the trade-offs
A 10GbE internet socket is only one part of the route
BE67 can accept a 10GbE WAN connection, but using its only 10GbE socket there leaves 2.5GbE and Gigabit wired LAN sockets. It does not provide a second 10GbE connection to a workstation.
What this is based on
BE67 has one 10GbE socket. Assigning it to WAN removes it from the LAN inventory. BT8 has no included 10GbE socket.
Main trade-off
ASUS ZenWiFi BT8 2-Pack
The selected package contains two nodes.
TP-Link Deco BE67 3-pack
- Choose it for
- Use a 10GbE modem or local network connection
- Place three supplied nodes at genuinely useful locations
- Main trade-off
- The single 10GbE socket cannot be WAN and a separate 10GbE LAN port at once.
ASUS ZenWiFi BT8 2-Pack
- Choose it for
- Keep compatible ASUS AiMesh hardware
- Connect more local wired devices at each node
- Main trade-off
- The selected package contains two nodes.
About this comparison
Compare the Deco BE67 three-pack and ZenWiFi BT8 two-pack for a 10GbE source, two-room wiring and an existing ASUS or Deco network.
Choose Deco BE67 for a 10GbE connection or when three useful node locations are already planned. Choose ZenWiFi BT8 when two nodes fit the home and each wired room needs several local connections. Both provide tri-band Wi-Fi 7, so the supplied unit count, port allocation and existing mesh family matter more than the shared generation label.
Winner by situation
Start with what you need it to do
Attach to a 10GbE modem port
BE67 has a 10GbE socket. BT8's included ports stop at 2.5GbE.
- TP-Link Deco BE67 3-pack
- Better fit
- ASUS ZenWiFi BT8 2-Pack
- Not suitable
Connect three wired devices beside a wired node
BT8 leaves three local sockets after one uplink. BE67 leaves two.
- TP-Link Deco BE67 3-pack
- Caution
- ASUS ZenWiFi BT8 2-Pack
- Better fit
Reuse compatible ASUS AiMesh nodes
BT8 belongs to ASUS AiMesh.
- TP-Link Deco BE67 3-pack
- Not suitable
- ASUS ZenWiFi BT8 2-Pack
- Better fit
Supply three new node locations from one box
This BE67 listing has three nodes. This BT8 listing has two.
- TP-Link Deco BE67 3-pack
- Better fit
- ASUS ZenWiFi BT8 2-Pack
- Caution
What matters in practice
The differences that matter
A 10GbE internet socket is only one part of the route
BE67 can accept a 10GbE WAN connection, but using its only 10GbE socket there leaves 2.5GbE and Gigabit wired LAN sockets. It does not provide a second 10GbE connection to a workstation.
How we reached this conclusion
BE67 has one 10GbE socket. Assigning it to WAN removes it from the LAN inventory. BT8 has no included 10GbE socket.
A wired studio has a different socket budget from a hallway
Using one socket for wired backhaul leaves BE67 with two local Ethernet connections and BT8 with three. A studio with a desktop, printer and console can therefore use BT8 without a separate desk switch.
How we reached this conclusion
Three minus one leaves two local BE67 ports. Four minus one leaves three BT8 ports. The calculation assumes one wired uplink.
A third unit needs a job before it needs a shelf
The selected BE67 package includes three nodes, while this BT8 package includes two. Choose BE67 if the third node will serve a separate wired room or another planned coverage location.
How we reached this conclusion
The package quantities are three and two. Additional node usefulness depends on placement and existing compatible hardware, not a blanket coverage promise.
Check your own setup
Will your wired mesh layout work?
Planning to connect your mesh nodes with Ethernet? Count the sockets before you buy. This checks direct cables from the main node to each satellite, without an extra network switch. These choices are examples until you apply yours.
TP-Link Deco BE67 3-pack
Meets these checksThe sockets cover this 2-node wired layout, leaving 0 unused gateway LAN sockets. The selected internet-to-device path has a 1 Gb/s link ceiling before overhead, not a promised download speed.
ASUS ZenWiFi BT8 2-Pack
Meets these checksThe sockets cover this 2-node wired layout, leaving 1 unused gateway LAN socket. The selected internet-to-device path has a 1 Gb/s link ceiling before overhead, not a promised download speed.
Port speeds are physical link ratings, not Wi-Fi throughput. Cable quality, client adapters and network configuration still matter. All requested nodes must be included in the linked bundle. This assumes router mode with one internet socket and star wiring. PoE units also need a compatible power source, which this socket check does not size. A switch, access-point mode or another layout changes the result. It does not predict wireless coverage.
Choice A
TP-Link, Deco BE67
Deco BE67 3-pack
A tri-band BE14000 mesh that adds 10Gbps networking to a fast 6 GHz radio set.
- Best matched use
- Use a 10GbE modem or local network connection
Checked facts
- Included nodes: Three
- Ethernet per node: One 10GbE, one 2.5GbE and one Gigabit
- Mesh family: Deco
- Wireless bands: 2.4GHz, 5GHz and 6GHz
Choice B
ASUS, ZenWiFi BT8
ZenWiFi BT8 2-Pack
A two-node choice for a fast wired link between floors while keeping two ordinary Ethernet devices beside each node.
- Best matched use
- Keep compatible ASUS AiMesh hardware
Checked facts
- Included nodes: Two
- Ethernet per node: One 2.5GbE WAN, one 2.5GbE LAN and two Gigabit LAN
- Mesh family: ASUS AiMesh
- Wireless bands: 2.4GHz, 5GHz and 6GHz
Meaningful differences
What changes the fit
| What changes | TP-Link Deco BE67 3-pack | ASUS ZenWiFi BT8 2-Pack | Why it matters |
|---|---|---|---|
| Included nodes | Three | Two | The selected Amazon packages cover different installation plans. |
| Ethernet per node | One 10GbE, one 2.5GbE and one Gigabit | One 2.5GbE WAN, one 2.5GbE LAN and two Gigabit LAN | A socket consumed by the uplink cannot also connect a desk device. |
| Mesh family | Deco | ASUS AiMesh | Existing nodes do not join one cross-brand mesh. |
| Wireless bands | 2.4GHz, 5GHz and 6GHz | 2.4GHz, 5GHz and 6GHz | Both can serve compatible 6GHz clients. |
What you give up
Every choice has a cost
If you choose TP-Link Deco BE67 3-pack
- Only two local sockets remain after wired backhaul.
If you choose ASUS ZenWiFi BT8 2-Pack
- No included Ethernet port negotiates a 10GbE connection.
Recommendation switch
The decision flips if...
I have three planned node locations and no spare compatible units
Choose TP-Link Deco BE67 3-pack. The selected BE67 package supplies three nodes.
My wired office node needs three local Ethernet devices
Choose ASUS ZenWiFi BT8 2-Pack. BT8 has four Ethernet sockets, leaving three after one uplink.
What matters in practice
How to make the call
A 10GbE internet socket is only one part of the route
BE67 can accept a 10GbE WAN connection, but using its only 10GbE socket there leaves 2.5GbE and Gigabit wired LAN sockets. It does not provide a second 10GbE connection to a workstation. BT8's included Ethernet sockets top out at 2.5GbE. Choose BE67 for the faster WAN attachment, but plan a different gateway or topology if one wired client must have a full 10GbE path through the router.
A wired studio has a different socket budget from a hallway
Using one socket for wired backhaul leaves BE67 with two local Ethernet connections and BT8 with three. A studio with a desktop, printer and console can therefore use BT8 without a separate desk switch. BE67 requires a switch or one wireless device for that three-device brief. Choose by the devices that actually stay beside the node, then confirm which remaining socket needs more than Gigabit.
A third unit needs a job before it needs a shelf
The selected BE67 package includes three nodes, while this BT8 package includes two. Choose BE67 if the third node will serve a separate wired room or another planned coverage location. If two well-placed nodes already meet the layout, the extra box does not establish a performance advantage. Existing Deco or AiMesh equipment can also change the number of new nodes you need.
What this comparison cannot tell you
- No measured coverage or throughput comparison is claimed. A third node can be unnecessary in a small apartment.
What the facts say
What the comparison shows
Useful conclusions from the current mesh Wi-Fi systems comparison, followed by the checked facts used to reach them.
See the checked facts and calculation notes
| Product | Needs matched | Checked facts | Source records |
|---|---|---|---|
| TP-Link Deco BE67 3-pack |
|
|
|
| ASUS ZenWiFi BT8 2-Pack |
|
|
|
Ready to choose?
Check the price. Read the owner reviews.
Open either model on Amazon to check the current price, customer reviews and delivery options.
TP-Link Deco BE67 3-pack
Use a 10GbE modem or local network connection
See price & reviews on AmazonASUS ZenWiFi BT8 2-Pack
Keep compatible ASUS AiMesh hardware
See price & reviews on AmazonLinks open in a new tab.