Main trade-off
TP-Link Deco BE25 3-pack
Changing from eero means replacing the managed mesh family.
Head-to-head
Choose Deco BE25 if existing Deco units will remain in your home. Choose eero 7 if you are extending an eero network or want its supported Zigbee hub for Alexa devices. Both have two 2.5GbE sockets per node and neither adds a 6GHz radio, so your wiring plan and existing equipment are more useful separators than the Wi-Fi 7 label.
Before you choose
An older node can still be useful beside a printer or in a room that needs coverage more than peak speed. BE25 belongs with Deco units, while eero 7 belongs with earlier eeros.
What this is based on
Compatibility is family-specific. Retained older units keep their own hardware limits.
Main trade-off
Changing from eero means replacing the managed mesh family.
Main trade-off
Changing from Deco means replacing the managed mesh family.


Compare Deco BE25 and eero 7 three-packs for keeping existing mesh units, wiring a desk and adding compatible Alexa devices.
Choose Deco BE25 if existing Deco units will remain in your home. Choose eero 7 if you are extending an eero network or want its supported Zigbee hub for Alexa devices. Both have two 2.5GbE sockets per node and neither adds a 6GHz radio, so your wiring plan and existing equipment are more useful separators than the Wi-Fi 7 label.
Winner by situation
Deco and eero are separate mesh families.
eero 7 supports earlier eero hardware.
Each retains one free Ethernet socket after its uplink.
Neither exact model has a 6GHz radio.
What matters in practice
An older node can still be useful beside a printer or in a room that needs coverage more than peak speed. BE25 belongs with Deco units, while eero 7 belongs with earlier eeros.
Compatibility is family-specific. Retained older units keep their own hardware limits.
At a wired office satellite, both models use one of their two sockets for the cable back to the main network. One socket remains for a desktop, dock or console.
Two sockets minus one wired uplink leaves one local Ethernet connection on each model.
For a buyer specifically trying to move a compatible laptop onto 6GHz, neither model meets that requirement. Wired backhaul can remove the inter-node wireless hop, but it does not create a missing radio band.
Both exact specifications list only 2.4GHz and 5GHz.
Check your own setup
Planning to connect your mesh nodes with Ethernet? Count the sockets before you buy. This checks direct cables from the main node to each satellite, without an extra network switch. These choices are examples until you apply yours.
The gateway cannot give your internet connection, 1 direct node link and 1 wired device separate sockets at the selected speeds. A suitable external switch may change that.
The gateway cannot give your internet connection, 1 direct node link and 1 wired device separate sockets at the selected speeds. A suitable external switch may change that.
Port speeds are physical link ratings, not Wi-Fi throughput. Cable quality, client adapters and network configuration still matter. All requested nodes must be included in the linked bundle. This assumes router mode with one internet socket and star wiring. PoE units also need a compatible power source, which this socket check does not size. A switch, access-point mode or another layout changes the result. It does not predict wireless coverage.

TP-Link, Deco BE25
A dual-band BE5000 mesh with Wi-Fi 7 MLO and two 2.5Gbps ports per node.

eero, P013111
A dual-band BE5000 mesh with Wi-Fi 7 MLO and two 2.5Gbps ports on every node.
Meaningful differences
| What changes | TP-Link Deco BE25 3-pack | eero 7 3-pack | Why it matters |
|---|---|---|---|
| Existing mesh family | Works with Deco models | Works with earlier eero models | Keep the family you already own when those units still have a useful location. |
| Ethernet sockets per unit | Two 2.5GbE | Two 2.5GbE | One is occupied by internet at the gateway or Ethernet backhaul at a satellite. |
| Radio bands | 2.4GHz and 5GHz | 2.4GHz and 5GHz | Neither provides a separate 6GHz client connection. |
| Smart-home setup route | Deco network management | Built-in supported Zigbee hub with linked Alexa account | eero offers a documented pairing route for compatible Zigbee accessories. This does not establish universal smart-home compatibility. |
What you give up
Recommendation switch
Choose TP-Link Deco BE25 3-pack. BE25 joins the existing Deco family.
Choose eero 7 3-pack. eero 7 includes the documented Zigbee hub, with linked accounts and compatible accessories.
What matters in practice
Choose Deco BE25 if existing Deco units will remain in your home.
An older node can still be useful beside a printer or in a room that needs coverage more than peak speed. BE25 belongs with Deco units, while eero 7 belongs with earlier eeros. Choose the family you already own if reusing those locations is part of the plan. Mixing brands does not produce one managed mesh, and a newer gateway does not upgrade the radio or Ethernet hardware inside an older node.
At a wired office satellite, both models use one of their two sockets for the cable back to the main network. One socket remains for a desktop, dock or console. Two local wired devices require a switch on either model. Choose on ecosystem fit if one socket is enough. If the goal is avoiding a desk switch entirely, neither of these two-port units meets a two-device brief.
What the facts say
Useful conclusions from the current mesh Wi-Fi systems comparison, followed by the checked facts used to reach them.
| Product | Needs matched | Checked facts | Source records |
|---|---|---|---|
| TP-Link Deco BE25 3-pack |
|
| |
| eero 7 3-pack |
|
|
Ready to choose?
Open either model on Amazon to check the current price, customer reviews and delivery options.

Keep compatible Deco units in the same mesh
See price & reviews on Amazon
Keep earlier eero units in the same mesh
See price & reviews on AmazonLinks open in a new tab.