Main trade-off
Canon MF465dw II
No color output even though the scanner captures color originals.
Head-to-head
Canon MF465dw II vs Brother MFC-L5915DW: Canon fits less space, Brother handles larger stacks
The short answer
Choose the MF465dw II for a smaller office handling double-sided paperwork. Choose the MFC-L5915DW for larger scanning batches and heavier monthly monochrome printing, provided you have room for its larger body.
Before you choose
The reasoning and the trade-offs
A sixty-page stack fits only one feeder
Sixty suitable sheets exceed the Canon 50-sheet feeder but fit within the Brother 70-sheet limit. That saves splitting the stack into separate loads, without claiming a particular scan-time advantage.
What this is based on
60>50 and 60<=70. Both single pass ADF.
Main trade-off
Brother MFC-L5915DW
No color printing and a much larger body than home-office models.
Canon MF465dw II
- Choose it for
- Your workload stays within 4000 pages a month
- A smaller multifunction body matters
- Main trade-off
- No color output even though the scanner captures color originals.
Brother MFC-L5915DW
- Choose it for
- You regularly scan more than 50 loose sheets
- Your monthly printing exceeds 4000 pages
- Main trade-off
- No color printing and a much larger body than home-office models.
About this comparison
Compare 50-sheet and 70-sheet scan stacks, monthly printing limits and desk footprint. Choose a monochrome workhorse around a normal month.
Choose the MF465dw II for a smaller office handling double-sided paperwork. Choose the MFC-L5915DW for larger scanning batches and heavier monthly monochrome printing, provided you have room for its larger body.
Winner by situation
Start with what you need it to do
Sixty-page two-sided records packet
Brother feeder accepts the whole supported stack.
- Canon MF465dw II
- Caution
- Brother MFC-L5915DW
- Better fit
Five thousand monochrome pages each month
Brother’s published recommendation covers this volume.
- Canon MF465dw II
- Caution
- Brother MFC-L5915DW
- Better fit
Small office with limited worktop surface
Canon has smaller closed footprint.
- Canon MF465dw II
- Better fit
- Brother MFC-L5915DW
- Depends
Color charts must remain in color
Both print black and white only.
- Canon MF465dw II
- Not suitable
- Brother MFC-L5915DW
- Not suitable
What matters in practice
The differences that matter
A sixty-page stack fits only one feeder
Sixty suitable sheets exceed the Canon 50-sheet feeder but fit within the Brother 70-sheet limit. That saves splitting the stack into separate loads, without claiming a particular scan-time advantage.
How we reached this conclusion
60>50 and 60<=70. Both single pass ADF.
The Brother needs about 21% more closed-body surface area
Canon width times depth is 300.46 square inches. Brother is 362.7. That is about 21% more, before paper trays, lid movement and clearances.
How we reached this conclusion
16.6 x 18.1=300.46.19.5 x 18.6=362.7. Difference 20.7%.
Five thousand pages a month changes the shortlist
A 5000-page recurring workload exceeds the Canon 4000-page recommended ceiling but is within the Brother 8000-page recommendation. The much larger duty-cycle number is not permission to ignore this difference.
How we reached this conclusion
Manufacturer recommended monthly max 4000 versus 8000.
Choice A
Canon, MF465dw II
MF465dw II
A busy monochrome office that scans two-sided paperwork regularly.
- Best matched use
- Your workload stays within 4000 pages a month
Checked facts
- Document feeder: 50-sheet single-pass duplex
- Recommended monthly printing: 750 to 4000 pages
- Letter output: Up to 42 ppm
- Closed footprint: 16.6 x 18.1 inches
Choice B
Brother, MFC-L5915DW
MFC-L5915DW
A document-heavy office that needs quick monochrome printing and scanning.
- Best matched use
- You regularly scan more than 50 loose sheets
Checked facts
- Document feeder: 70-sheet single-pass duplex
- Recommended monthly printing: Up to 8000 pages
- Letter output: Up to 50 ppm
- Closed footprint: 19.5 x 18.6 inches
Meaningful differences
What changes the fit
| What changes | Canon MF465dw II | Brother MFC-L5915DW | Why it matters |
|---|---|---|---|
| Document feeder | 50-sheet single-pass duplex | 70-sheet single-pass duplex | The Brother accepts larger stacks in one load. |
| Recommended monthly printing | 750 to 4000 pages | Up to 8000 pages | Recommended volume guides recurring workload better than duty cycle. |
| Letter output | Up to 42 ppm | Up to 50 ppm | Long print batches make the rated difference relevant. |
| Closed footprint | 16.6 x 18.1 inches | 19.5 x 18.6 inches | The Brother needs more worktop area. |
| Standard paper input | 350 sheets | 350 sheets | Higher throughput does not add more base paper storage. |
What you give up
Every choice has a cost
If you choose Canon MF465dw II
- Scan packets above 50 suitable sheets must be split into separate feeder loads.
If you choose Brother MFC-L5915DW
- Its base paper input is 350 sheets, so extra trays are needed to load a full 500-sheet ream at once.
Recommendation switch
The decision flips if...
Recurring monthly printing exceeds 4000 pages
Choose Brother MFC-L5915DW. Brother has a higher recommended workload.
Workload is moderate and counter space is limited
Choose Canon MF465dw II. Canon retains two-sided scanning in a smaller body.
You need color printed output
Choose neither. A color laser-class model is required.
What matters in practice
How to make the call
Size the machine around a normal month
Canon recommends 750 to 4000 pages a month. Brother allows up to 8000. These figures address recurring workload. A maximum duty cycle is a different engineering limit and does not make the Canon a good default for a 5000-page monthly routine.
The feeder can matter more than print speed
Both capture both sides in one pass. Brother accepts 70 sheets rather than 50, which is helpful when a real packet falls between those limits. Small ten-page jobs do not benefit from the extra capacity.
Paper storage is tied in the base configuration
Both have 350 sheets of standard input. The Brother prints faster on paper, but you do not get more paper loaded unless you buy optional trays. Include those parts when comparing the total installation.
Keep space for originals and finished paper
The Brother is wider and deeper. Neither closed footprint includes every working clearance. Position the printer where people can load the ADF, lift the flatbed cover and retrieve printouts without moving the machine.
What this comparison cannot tell you
- Rated print speeds are manufacturer figures, not matched hands-on tests.
- Toner yields use standardized test documents and vary with content.
What the facts say
What the comparison shows
Useful conclusions from the current laser printers comparison, followed by the checked facts used to reach them.
See the checked facts and calculation notes
| Product | Needs matched | Checked facts | Source records |
|---|---|---|---|
| Canon MF465dw II |
|
| |
| Brother MFC-L5915DW |
|
|
Ready to choose?
Check the price. Read the owner reviews.
Open either model on Amazon to check the current price, customer reviews and delivery options.
Canon MF465dw II
Your workload stays within 4000 pages a month
See price & reviews on AmazonBrother MFC-L5915DW
You regularly scan more than 50 loose sheets
See price & reviews on AmazonLinks open in a new tab.