Main trade-off
Brother MFC-L8730CDW
Its main tray stops at 28 lb bond. The larger feeder does not make it the better machine for every paper stock.
Head-to-head
Brother MFC-L8730CDW vs Canon MF753Cdw II: Brother reloads scans less, Canon takes heavier main-tray paper
The short answer
Choose MFC-L8730CDW for eligible 51- to 80-sheet scan packets and routine printing above 4,000 pages a month, within its 5,000-page recommendation. Choose MF753Cdw II when packets fit 50 sheets and approved heavier paper needs to stay in the main tray. Canon accepts up to 200 gsm there, while Brother lists 28 lb bond, about 105 gsm. Neither closed-body measurement is enough to approve a shelf installation.
Before you choose
The reasoning and the trade-offs
Fewer visits matter more than the number of scanned sides
If the office printer is across the room and a typical signed packet has 70 sheets, Brother lets you load the eligible packet once. Canon needs a second load after the first 50. That is a real interruption difference for someone alternating paperwork with calls, even though both scan both sides automatically. With 20-sheet packets, the feeder-capacity upgrade does not remove any loading step.
What this is based on
For 70 supported sheets, ceiling(70/80) = 1 versus ceiling(70/50) = 2. The scenario counts loads, not minutes, processing time or error rates.
Main trade-off
Canon MF753Cdw II
Packets above 50 eligible sheets must be split. The selected Amazon offer was from Provantage LLC, so check seller and warranty terms.
Brother MFC-L8730CDW
- Choose it for
- Load eligible 51- to 80-sheet scan packets without splitting them.
- Cover a routine workload above 4,000 and up to 5,000 printed pages monthly.
- Main trade-off
- Its main tray stops at 28 lb bond. The larger feeder does not make it the better machine for every paper stock.
Canon MF753Cdw II
- Choose it for
- Keep approved heavier media, up to 200 gsm, in the main paper tray.
- Choose a lower body when ordinary packets already fit the 50-sheet feeder, after checking lid clearance.
- Main trade-off
- Packets above 50 eligible sheets must be split. The selected Amazon offer was from Provantage LLC, so check seller and warranty terms.
About this comparison
Compare larger scan packets, heavier main-tray paper and shared-office placement. Choose the color all-in-one that fits your paperwork, with exact Amazon models.
These are current color laser all-in-ones with fax, wired networking and one-pass duplex scanning. Buyers can reasonably trade a larger Brother feeder against Canon paper flexibility and a lower body.
Winner by situation
Start with what you need it to do
Seventy eligible original sheets need scanning in one packet
Brother holds them in one ADF load. Canon needs two.
- Brother MFC-L8730CDW
- Better fit
- Canon MF753Cdw II
- Caution
Approved 160 gsm handouts should stay in the main tray
That weight exceeds Brother main-tray limit but is inside Canon published range. Check media type too.
- Brother MFC-L8730CDW
- Not suitable
- Canon MF753Cdw II
- Better fit
The team routinely prints 4,500 pages each month
Brother recommendation reaches 5,000. Canon reaches 4,000.
- Brother MFC-L8730CDW
- Better fit
- Canon MF753Cdw II
- Caution
An enclosed shelf only matches the closed dimensions
Scanner opening, airflow and tray access must be checked before either purchase.
- Brother MFC-L8730CDW
- Caution
- Canon MF753Cdw II
- Caution
What matters in practice
The differences that matter
Fewer visits matter more than the number of scanned sides
If the office printer is across the room and a typical signed packet has 70 sheets, Brother lets you load the eligible packet once. Canon needs a second load after the first 50. That is a real interruption difference for someone alternating paperwork with calls, even though both scan both sides automatically. With 20-sheet packets, the feeder-capacity upgrade does not remove any loading step.
How we reached this conclusion
For 70 supported sheets, ceiling(70/80) = 1 versus ceiling(70/50) = 2. The scenario counts loads, not minutes, processing time or error rates.
Thicker handouts can change which tray is left free
For a small business that uses heavier sheets routinely and letterhead occasionally, Canon can leave more approved paper weights in the main drawer and reserve the multipurpose tray for the occasional job. Brother main-tray stock stops around 105 gsm. Its multipurpose path widens that range, but then that path is occupied. If everything you print is ordinary 20 lb paper, this advantage largely disappears.
How we reached this conclusion
Brother main tray 16-28 lb bond, roughly 60-105 gsm. Canon brochure permits approved 60-200 gsm main-tray media. Weight alone does not approve a coating, label or custom sheet.
An occasional rush and a sustained workload are different purchases
If several people collectively print 4,500 pages every month, Brother sits inside its recommended range while Canon is above its 4,000-page upper recommendation. That is a stronger reason to favor Brother than its feeder when everyone scans short packets. If 4,500 pages was one unusual month, first check your usual workload instead of treating a single rush as a permanent need.
How we reached this conclusion
4,500 is below Brother 5,000 and above Canon 4,000 recommended monthly maxima. Maximum duty cycle is excluded. This does not predict failure or operating cost.
Choice A
Brother, MFC-L8730CDW
MFC-L8730CDW
Load eligible 51- to 80-sheet scan packets without splitting them.
- Best matched use
- Load eligible 51- to 80-sheet scan packets without splitting them.
Checked facts
- Originals per feeder load: 80-sheet single-pass duplex feeder, based on 20 lb paper. Letter-size document glass.
- The paper kept in the main tray: 250-sheet main tray plus 50-sheet multipurpose tray. Main tray accepts 16-28 lb bond, multipurpose 16-43 lb.
- Routine monthly printing: Recommended up to 5,000 pages monthly.
- Body height and access: Closed body 15.9 x 18.6 x 18.1 inches, width x depth x height. Weight 56.5 lb.
Choice B
Canon, MF753Cdw II
MF753Cdw II
Keep approved heavier media, up to 200 gsm, in the main paper tray.
- Best matched use
- Keep approved heavier media, up to 200 gsm, in the main paper tray.
Checked facts
- Originals per feeder load: MF753Cdw II has a 50-sheet one-pass duplex ADF. The MF751Cdw II is different and scans one side through its feeder.
- The paper kept in the main tray: 250-sheet main tray plus 50-sheet multipurpose tray. Approved main-tray media spans 60-200 gsm.
- Routine monthly printing: Recommended 750 to 4,000 pages monthly.
- Body height and access: Body height 17 inches. The manual requires at least 4 inches around the machine and lists a larger maximum operating envelope.
Meaningful differences
What changes the fit
| What changes | Brother MFC-L8730CDW | Canon MF753Cdw II | Why it matters |
|---|---|---|---|
| Originals per feeder load | 80-sheet single-pass duplex feeder, based on 20 lb paper. Letter-size document glass. | MF753Cdw II has a 50-sheet one-pass duplex ADF. The MF751Cdw II is different and scans one side through its feeder. | Brother reduces loading visits for a particular packet size. Both already automate the second side. |
| The paper kept in the main tray | 250-sheet main tray plus 50-sheet multipurpose tray. Main tray accepts 16-28 lb bond, multipurpose 16-43 lb. | 250-sheet main tray plus 50-sheet multipurpose tray. Approved main-tray media spans 60-200 gsm. | Canon can cover approved stock that must move to a different path, or is outside the stated range, on Brother. |
| Routine monthly printing | Recommended up to 5,000 pages monthly. | Recommended 750 to 4,000 pages monthly. | A workload above 4,000 changes the choice even if both printers seem fast enough for one job. |
| Body height and access | Closed body 15.9 x 18.6 x 18.1 inches, width x depth x height. Weight 56.5 lb. | Body height 17 inches. The manual requires at least 4 inches around the machine and lists a larger maximum operating envelope. | A lower closed body is useful only if the installed scanner can still open. |
What you give up
Every choice has a cost
If you choose Brother MFC-L8730CDW
- The 80-sheet ADF is for supported loose originals. Books still use the Letter glass and require room above it.
If you choose Canon MF753Cdw II
- Canon requires at least 4 inches around the machine. Optional paper capacity also costs extra and adds height.
Recommendation switch
The decision flips if...
Packets often exceed 50 sheets or routine printing exceeds 4,000 pages monthly
Choose Brother MFC-L8730CDW. The larger feeder and higher recommended workload cover those specific demands.
Packets are shorter and approved heavy paper needs the main tray
Choose Canon MF753Cdw II. Canon paper handling can preserve the alternate tray for another stock.
You cannot provide the required working and ventilation clearances
Choose neither. Change the installation before choosing either printer.
What matters in practice
Before you choose
You need to scan paperwork in fewer visits, but the same printer also handles heavier handouts and lives beside other office equipment.
What this comparison cannot tell you
- Canon brochure and manual disagree on output capacity, so that figure does not decide this page.
- No matched speed, image quality or consumable-cost test.
- Both products need separate setup for network and cloud destinations.
What the facts say
What the comparison shows
Useful conclusions from the current laser printers comparison, followed by the checked facts used to reach them.
See the checked facts and calculation notes
| Product | Needs matched | Checked facts | Source records |
|---|---|---|---|
| Brother MFC-L8730CDW |
|
| |
| Canon MF753Cdw II |
|
|
Ready to choose?
Check the price. Read the owner reviews.
Open either model on Amazon to check the current price, customer reviews and delivery options.
Brother MFC-L8730CDW
Load eligible 51- to 80-sheet scan packets without splitting them.
Cover a routine workload above 4,000 and up to 5,000 printed pages monthly.
See price & reviews on AmazonCanon MF753Cdw II
Keep approved heavier media, up to 200 gsm, in the main paper tray.
Choose a lower body when ordinary packets already fit the 50-sheet feeder, after checking lid clearance.
See price & reviews on AmazonLinks open in a new tab.