Specifications, manuals and independent publications used in these comparisons.
Source records
The Nines II balanced analog inputs
Klipsch, Manufacturer specification, Reviewed October 4, 2026
Official model-specific support resolves the omission in the specification sheet. Two combo balanced inputs accept XLR or quarter-inch TRS. A compatible balanced source is required. This does not establish microphone amplification or instrument input.
The Nines II My Input buttons
Klipsch, Manufacturer specification, Reviewed October 4, 2026
Two buttons save supported sound mode, EQ, source and playlist or station. Shared with Fives II and Sevens II.
The Fives II My Input buttons
Klipsch, Manufacturer specification, Reviewed October 4, 2026
Two programmable buttons recall supported sound mode, EQ, source and playlist or station. This is shared with Sevens II, not a reason by itself to buy the larger model.
Kanto, Manufacturer specification, Reviewed October 4, 2026
ORA4, not original ORA. RCA line, USB-C audio and Bluetooth. Automatic 80 Hz high-pass and low-pass filtering when a subwoofer is connected. 4.7 W by 6.7 D by 8.3 H inches. No room-size or measured sound comparison inferred.
Kanto, Manufacturer specification, Reviewed October 4, 2026
HDMI ARC with CEC, RCA line, auxiliary, optical and USB-C audio. Separate USB-C charging port. Automatic 80 Hz crossover. Night and vocal modes are control functions, not hearing treatments. 7 W by 8.5 D by 10.9 H inches.
Kanto, Manufacturer specification, Reviewed October 4, 2026
Explicit generation columns establish original TUK phono and headphone output, absent on Grand G2. Original USB-B versus Grand USB-C audio. Do not use inconsistent Bluetooth version or percent-power marketing for a buying claim.
Kanto, Manufacturer specification, Reviewed October 4, 2026
Manufacturer-authored original manual preserved by a manual host. Separate phono and line inputs, headphone output and swappable active channel. Original channel selection resets to left after a power cycle. Not a G2 manual.
Kanto, Manufacturer specification, Reviewed October 4, 2026
Six-inch woofer, two RCA line inputs, USB-C audio, optical and Bluetooth. No phono stage or headphone output. Swappable active speaker and selectable 80 Hz filtering. 8.6 W by 11.6 D by 13.8 H inches. Selected US finish is Matte Black with Gunmetal.
Kanto, Manufacturer specification, Reviewed October 4, 2026
Use only the Gen 1 columns for selected original Amazon products. Both have switchable phono/line, auxiliary and two optical inputs. USB-A is charging only. Active speaker is fixed left. YU4 5.5 W by 7.5 D by 8.7 H inches. YU6 6.9 W by 8.1 D by 10.7 H. G2 USB audio, crossover and placement features are not transferred.
KEF, Manufacturer specification, Reviewed October 4, 2026
HDMI ARC, optical and USB-C audio, network streaming and subwoofer output. Mandatory wired interspeaker connection. 240 H by 155 W by 180 D mm. No analog line input.
KEF, Manufacturer specification, Reviewed October 4, 2026
One mains connection, secondary powered over included 3 m C-Link. Optional 8 m C-Link. Network setup, updates and restrictions on guest or authentication networks. Do not claim ordinary USB charging cables are interchangeable with C-Link.
KEF, Manufacturer specification, Reviewed October 4, 2026
Original LSX II, not LT. Analog 3.5 mm line input, HDMI ARC, optical, USB-C and network streaming. Wired or wireless interspeaker connection. Same 240 H by 155 W by 180 D mm body as LT.
KEF, Manufacturer specification, Reviewed October 4, 2026
Both speaker cabinets require mains power. Wireless interspeaker use removes the linking signal cable, not both power cables. Analog input is line level, not a moving-magnet phono stage.
KEF, Manufacturer specification, Reviewed October 4, 2026
Separate MM phono and RCA line inputs, HDMI, optical, USB-C computer audio and Bluetooth. No built-in Wi-Fi music streaming. Wired C-Link between speakers, one mains lead. 285 H by 168 W by 268 D mm. Bluetooth codec support depends on source compatibility.
KEF, Manufacturer specification, Reviewed October 4, 2026
HDMI eARC, optical, coaxial, analog line and network streaming. USB-A is service only, not a computer audio input. Wired or wireless interspeaker link. 305 H by 200 W by 311 D mm. No audible improvement inferred from sample-rate ceilings.
Klipsch, Manufacturer specification, Reviewed October 4, 2026
Original 4.5-inch model. HDMI ARC with CEC, USB-B audio, optical, auxiliary and shared switchable RCA phono/line. 12 H by 6.5 W by 9.25 D inches. 4 m interspeaker cable. Not The Fives II.
Klipsch, Manufacturer specification, Reviewed October 4, 2026
Original 6.5-inch model. HDMI ARC with CEC, USB-B, optical, auxiliary and shared RCA phono/line. 16.38 H by 8.13 W by 10.88 D inches. Supplied 4 m interspeaker cable and 2 m extension. No Wi-Fi streamer or Dirac listed.
Klipsch, Manufacturer specification, Reviewed October 4, 2026
Exact US model 1080237. Separate phono and line inputs, HDMI input plus eARC, Wi-Fi streaming, USB-C audio and 4 m speaker cable. 12.9 H by 7.2 W by 10.7 D inches. Atmos is virtual processing from a stereo pair, not discrete rear or height speakers.
Klipsch, Manufacturer specification, Reviewed October 4, 2026
HDMI 2.1 passthrough with stated 4K/120 Hz, VRR and ALLM support. Actual source, TV and cables must support the desired format. HDMI input and TV eARC output are distinct ports.
Klipsch, Manufacturer specification, Reviewed October 4, 2026
Exact selected US part 1080243. 15 H by 8.12 W by 12.5 D inches, optional wireless interspeaker connection, microphone and limited Dirac license included. No full-band Dirac license assumed.
Klipsch, Manufacturer specification, Reviewed October 4, 2026
Exact selected US part 1080249. 18.13 H by 9.62 W by 14.75 D inches, 8-inch woofer, wireless link and limited Dirac license. Secondary kilogram typo is excluded. Balanced inputs are separately established by the model-specific support article.
The Sevens II inputs and controls
Klipsch, Manufacturer specification, Reviewed October 4, 2026
Separate phono and line, HDMI input and eARC output, coaxial, optical, USB-C audio, microphone and optional interspeaker cable. Source routing verified against rear-panel description.
The Sevens II My Input buttons
Klipsch, Manufacturer specification, Reviewed October 4, 2026
Two buttons can recall a saved source, sound mode, EQ and supported playlist or station. Setup is required. No claim that every third-party app or playlist can be assigned.
The Sevens II Dirac setup
Klipsch, Manufacturer specification, Reviewed October 4, 2026
Calibration requires a quiet room and several measurement positions. Supplied microphone must be unplugged for playback. Room correction does not soundproof a room or guarantee less disturbance next door.
Klipsch, Manufacturer specification, Reviewed October 4, 2026
Powered R-50PM, not passive R-50M. Shared phono/line RCA, auxiliary, optical, USB and Bluetooth, with sub out. 14 H by 7 W by 10.8 D inches. Four-meter ordinary speaker wire. No HDMI input.
Klipsch, Manufacturer specification, Reviewed October 4, 2026
Powered R-40PM, not passive R-40M. Same documented input types as R-50PM, four-inch woofer, 11.8 H by 5.7 W by 10.1 D inches. Inconsistent peak power excluded. No sound or room-capacity ranking inferred.
HD5 technical specifications
Audioengine, Manufacturer specification, Reviewed October 4, 2026
RCA and 3.5 mm line inputs, optical, Bluetooth and variable full-range RCA output. 11 H by 7.16 W by 7.79 D inches. Conflicting Bluetooth version, converter chip and copied weight fields excluded. No phono stage or HDMI.
HD6 technical specifications
Audioengine, Manufacturer specification, Reviewed October 4, 2026
5.5-inch woofer, optical, Bluetooth and analog line inputs, variable RCA output. 11.75 H by 7.25 W by 10 D inches. Turntable needs a phono stage in the turntable or externally. No HDMI or USB audio.
A5+ Wireless inputs and operating FAQ
Audioengine, Manufacturer specification, Reviewed October 4, 2026
RCA and 3.5 mm line inputs are both open, plus Bluetooth. No optical, HDMI or USB audio. Active cabinet 10.75 H by 7 W by 9 D inches. Phono stage required for turntables without one. Not the wired A5+.
A5+ Classic wired specifications and quick setup
Audioengine, Manufacturer specification, Reviewed October 4, 2026
RCA and 3.5 mm analog inputs remain active together. USB is 5V charging only. No built-in Bluetooth or headphone output. Active body 10.75 H by 7 W by 9 D inches. Guide recommends six inches behind speakers. No physical-input switching inferred.
ELAC, Manufacturer specification, Reviewed October 4, 2026
4.5-inch model, HDMI ARC, USB audio, optical, Bluetooth and switchable RCA phono/line, sub out. 5.5 W by 8 D by 9.625 H inches. One powered cabinet and wired passive speaker.
ELAC, Manufacturer specification, Reviewed October 4, 2026
Rear input and phono switch, computer USB and TV setup. RCA line and phono share one physical pair. Page 8 confirms selectable side. The L/R switch refers to the speaker-output terminals, so follow the diagram rather than assuming the marked letter is the powered cabinet channel.
ELAC, Manufacturer specification, Reviewed October 4, 2026
6.5-inch model, HDMI, USB computer audio, optical and Bluetooth. 205 W by 243 D by 330 H mm. Product page says eARC while the manual and rear label say ARC, so no eARC advantage is published.
ELAC, Manufacturer specification, Reviewed October 4, 2026
Rear-panel diagram confirms ARC, selectable active-speaker channel, switchable RCA phono/line and separate USB service and USB computer audio. Several copied DCB41 references mean those passages are not treated as DCB61-specific proof.
Edifier, Manufacturer specification, Reviewed October 4, 2026
Wireless interspeaker signal, XLR and RCA analog, optical, coaxial and USB-B audio, Bluetooth and ConneX controls. An app does not establish a Wi-Fi music streamer. 222 W by 360 H by 268 D mm.
Edifier, Manufacturer specification, Reviewed October 4, 2026
Power connections on both cabinets, wireless speaker pairing and distinct wired inputs. No HDMI or phono input. Controls and headphone arrangements are not inferred from another S-series model.
Edifier, Manufacturer specification, Reviewed October 4, 2026
AirPlay 2, Spotify Connect and Tidal Connect network streaming. Two RCA line inputs, optical, coaxial and Bluetooth. No HDMI or USB audio. 7.6 W by 13.6 H by 11.6 D inches. External phono stage required when turntable lacks one.
Edifier, Manufacturer specification, Reviewed October 4, 2026
Two RCA line inputs, optical, coaxial and Bluetooth. Input display, remote and listening modes. No Wi-Fi streaming, HDMI or computer USB input established by the complete input list.
Edifier, Manufacturer specification, Reviewed October 4, 2026
English pages document wired interspeaker link, input selection and optical/coaxial stereo PCM requirements. Minimum five centimeters around the product for ventilation. No phono stage.
SVS, Manufacturer specification, Reviewed October 4, 2026
Speaker pair, not SoundBase amplifier. HDMI ARC, optical, analog line, Bluetooth and network streaming. Primary body 295 H by 180 W by 228 D mm before feet. Six physical presets and subwoofer output.
SVS, Manufacturer specification, Reviewed October 4, 2026
Powered right cabinet and ten-foot proprietary interconnect. 3.5 mm input overrides RCA when both are connected. Presets exclude Bluetooth, AirPlay and Chromecast. HDMI requires stereo PCM. Presets can recall wired inputs and supported Play-Fi services after setup.
TRIANGLE, Manufacturer specification, Reviewed October 4, 2026
HDMI ARC, USB computer audio, optical, coaxial, analog and MM phono, Bluetooth and RF remote. 176 W by 310 H by 274 D mm. Conflicting weight, amplifier and room-area marketing excluded.
TRIANGLE, Manufacturer specification, Reviewed October 4, 2026
HDMI ARC and USB computer audio, RF remote, analog and MM phono, optical, coaxial and Bluetooth. 206 W by 360 H by 314 D mm. Room-area recommendations are inconsistent and not used as selection thresholds.
TRIANGLE, Manufacturer specification, Reviewed October 4, 2026
Manufacturer manual on authorized retailer host. Rear panel shows separate LINE IN and PHONO IN, plus auxiliary. HDMI requires stereo PCM. RF remote, dedicated input keys, eight remembered Bluetooth devices and manual Bluetooth handover. Both Connect sizes share this connection layout.
TRIANGLE, Manufacturer specification, Reviewed October 4, 2026
Original BR03 BT, not BR03 Connect or passive BR03. One RCA pair switches between phono and line. Auxiliary, optical, coaxial and Bluetooth, no HDMI or USB audio. RF remote and three-second Bluetooth disconnect. Powered speaker fixed right. 206 W by 360 H by 314 D mm.