Main trade-off
EcoFlow RIVER 2
The 300W inverter rules out most heaters, kettles and corded tools. The 600W X-Boost headline is not full-voltage continuous output.
Head-to-head
Choose RIVER 2 for a light electronics kit. RIVER 2 Pro triples the stored energy and raises the appliance ceiling, with a much heavier carry.
Before you choose
For a steady 300W load, EcoFlow RIVER 2 models to about 0.7 hours and EcoFlow RIVER 2 Pro to 2 hours.
What this is based on
Hours = nominal Wh × 0.8 / 300W. Inputs 256Wh and 768Wh. The 80% factor is a shared planning allowance for unusable energy and conversion losses, not a measured efficiency. Idle draw, temperature and the real load change runtime.
Main trade-off
The 300W inverter rules out most heaters, kettles and corded tools. The 600W X-Boost headline is not full-voltage continuous output.
Main trade-off
The 220W solar input is the same ceiling as RIVER 2 Max despite carrying 50% more battery energy.


Choose RIVER 2 for a light electronics kit. RIVER 2 Pro triples the stored energy and raises the appliance ceiling, with a much heavier carry.
This is a capacity-class change
Winner by situation
RIVER 2 weighs 7.7 lb against 18.2 lb for Pro. It saves 10.5 lb for light electronics, but has one third of the nominal energy and a 300W continuous ceiling.
The continuous rating rises from 300W to 800W. Use those figures instead of X-Boost when choosing a voltage-sensitive appliance.
The shared planning case gives 0.7 hours from EcoFlow RIVER 2 and 2 from EcoFlow RIVER 2 Pro. Measure actual wattage before choosing a required overnight reserve.
The maximum input is 110W for EcoFlow RIVER 2 and 220W for EcoFlow RIVER 2 Pro. Compare your actual panel strings with the voltage and current limits as well as this total.
What matters in practice
For a steady 300W load, EcoFlow RIVER 2 models to about 0.7 hours and EcoFlow RIVER 2 Pro to 2 hours.
Hours = nominal Wh × 0.8 / 300W. Inputs 256Wh and 768Wh. The 80% factor is a shared planning allowance for unusable energy and conversion losses, not a measured efficiency. Idle draw, temperature and the real load change runtime.
EcoFlow RIVER 2 stores about 33.2 nominal watt-hours per pound, compared with 42.2 for EcoFlow RIVER 2 Pro.
Nominal energy divided by published weight: 256 / 7.7 and 768 / 18.2. This compares stored energy per lifting weight, not measured efficiency or handle comfort.
RIVER 2 Pro has three times the capacity and about 2.36 times the carry weight of RIVER 2.
768 / 256 = 3. 18.2 / 7.7 = 2.36. Continuous output rises from 300W to 800W.

EcoFlow, EFR600
A 7.7-pound station for lights, phones and modest laptop loads. Its 256Wh battery is easy to carry, with a one-hour advertised wall recharge.

EcoFlow, EFR620
A 768Wh camping station with 800W continuous AC output and a useful 100W USB-C port. It adds battery reserve without reaching full 1kWh weight.
Meaningful differences
| What changes | EcoFlow RIVER 2 | EcoFlow RIVER 2 Pro | Why it matters |
|---|---|---|---|
| Nominal battery energy | 256 Wh | 768 Wh | Stored energy determines the starting runtime budget. |
| Continuous AC output | 300 W | 800 W | This is the sustained rating used for load screening, separate from surge and boost modes. |
| Lifting weight | 7.7 lb | 18.2 lb | Wheels help on flat ground. A trunk, step or shelf still requires a lift. |
| Maximum solar input | 110 W | 220 W | The panel voltage, current and per-port limits must also fit. |
| Dedicated battery expansion | Fixed base capacity | Fixed base capacity | Charging from an external source is different from integrated battery expansion. |
| Published transfer limit | 30 ms | 30 ms | Verify the exact connected device. A short transfer specification does not guarantee uninterrupted operation for every load. |
What you give up
What matters in practice
RIVER 2 has 256Wh and Pro 768Wh. The same steady load gets three times the modeled runtime before accounting for model-specific losses.
The continuous rating rises from 300W to 800W. Use those figures instead of X-Boost when choosing a voltage-sensitive appliance.
RIVER 2 weighs 7.7 pounds against 18.2. For a short outing with only a laptop and phone, the unused Pro reserve adds a noticeable 10.5 pounds.
What the facts say
Useful conclusions from the current portable power stations comparison, followed by the checked facts used to reach them.
Only 6 of 50 models checked match every need here: “I want power for campsites and weekends away”, “I need backup for household essentials”, and “Solar is a real part of my recharge plan”.
6 matching models from 50 checkedEcoFlow RIVER 2 Pro lists 768 Wh for battery capacity, 200% above EcoFlow RIVER 2 at 256 Wh.
Match countThe count uses the current product-to-need assignments for “I want power for campsites and weekends away”, “I need backup for household essentials”, and “Solar is a real part of my recharge plan”. A need with no documented match does not count.
Calculation noteThis compares nominal watt-hour capacity. Real delivered energy depends on inverter losses, temperature and load. 50 of 50 models have comparable published figures for context.
| Product | Needs matched | Checked facts | Source records |
|---|---|---|---|
| EcoFlow RIVER 2 |
|
|
|
| EcoFlow RIVER 2 Pro |
|
|
|
Ready to choose?
Open either model on Amazon to check the current price, customer reviews and delivery options.

Travel with phones and light electronics
See price & reviews on Amazon
Run a supported appliance above 300W
See price & reviews on AmazonLinks open in a new tab.