Main trade-off
DJI Power 1000 V2
Solar and drone functions can require separately purchased model-specific accessories.
Head-to-head
DJI Power 1000 V2 vs Anker SOLIX C1000 Gen 2: DJI needs SDC accessory planning, Anker includes solar input
The short answer
Choose Power 1000 V2 when documented DJI drone-charging cables or future expansion batteries justify its SDC accessory system. Choose C1000 Gen 2 for a self-contained 1024Wh station with a built-in solar input and no expansion-battery plan. Both require compatible cables and electrical limits. DJI's full SDC and SDC Lite ports are different, so design the charging setup before buying extra modules.
Before you choose
The reasoning and the trade-offs
A drone-charging purchase starts with the aircraft model
DJI documents separate SDC fast-charge cables for named aircraft families, including Air 3 and Mavic 3 series. Choose Power 1000 V2 if your exact aircraft and selected cable appear in the compatibility instructions.
What this is based on
The DJI manual lists model-specific SDC accessories and says accessories are separate unless stated otherwise. The Anker route assumes a verified compatible external aircraft charger.
Main trade-off
Anker SOLIX C1000 Gen 2
Gen 2 cannot accept an expansion battery.
DJI Power 1000 V2
- Choose it for
- Use a documented DJI SDC cable for a compatible aircraft battery
- Add supported DJI expansion batteries later
- Main trade-off
- Solar and drone functions can require separately purchased model-specific accessories.
Anker SOLIX C1000 Gen 2
- Choose it for
- Connect compatible solar through the built-in XT60i input
- Keep a fixed-capacity 1024Wh kit without expansion hardware
- Main trade-off
- Gen 2 cannot accept an expansion battery.
About this comparison
Compare Power 1000 V2 and C1000 Gen 2 for drone charging, solar accessories, expansion batteries and keeping a compact field kit.
Choose Power 1000 V2 when documented DJI drone-charging cables or future expansion batteries justify its SDC accessory system. Choose C1000 Gen 2 for a self-contained 1024Wh station with a built-in solar input and no expansion-battery plan. Both require compatible cables and electrical limits. DJI's full SDC and SDC Lite ports are different, so design the charging setup before buying extra modules.
Winner by situation
Start with what you need it to do
Use a verified model-specific DJI SDC drone cable
Only DJI provides that direct accessory interface.
- DJI Power 1000 V2
- Better fit
- Anker SOLIX C1000 Gen 2
- Not suitable
Add supported expansion batteries later
C1000 Gen 2 has no expansion feature.
- DJI Power 1000 V2
- Better fit
- Anker SOLIX C1000 Gen 2
- Not suitable
Use compatible solar without a separate solar-controller module
Anker has a built-in MPPT input. DJI needs its specified accessory route.
- DJI Power 1000 V2
- Caution
- Anker SOLIX C1000 Gen 2
- Better fit
Assume all charging and expansion accessories fit simultaneously
Check occupied ports, compatibility and system limits before ordering.
- DJI Power 1000 V2
- Caution
- Anker SOLIX C1000 Gen 2
- Caution
What matters in practice
The differences that matter
A drone-charging purchase starts with the aircraft model
DJI documents separate SDC fast-charge cables for named aircraft families, including Air 3 and Mavic 3 series. Choose Power 1000 V2 if your exact aircraft and selected cable appear in the compatibility instructions.
How we reached this conclusion
The DJI manual lists model-specific SDC accessories and says accessories are separate unless stated otherwise. The Anker route assumes a verified compatible external aircraft charger.
Solar and expansion can compete for the accessory connection
Power 1000 V2's expansion batteries use its full SDC port. DJI also reserves that port for certain high-power charging accessories, while SDC Lite supports a different subset.
How we reached this conclusion
DJI's manual distinguishes SDC from SDC Lite and marks expansion and the 1.8kW solar/car charger as full-SDC accessories. Anker documents a built-in XT60i input and no Gen 2 expansion.
Equal base capacity means expansion is a future-system choice
Both base stations store 1024Wh. Choosing DJI for expansion does not provide extra runtime until the supported battery and connection hardware are actually purchased.
How we reached this conclusion
1024Wh equals 1024Wh. DJI expansion is optional, while Anker explicitly excludes expansion on Gen 2.
Choice A
DJI, Power 1000 V2
Power 1000 V2
A quiet 1,024Wh station with 2,600W output, dual 140W USB-C and the deepest direct-charging support for DJI aircraft.
- Best matched use
- Use a documented DJI SDC cable for a compatible aircraft battery
Checked facts
- Nominal capacity: 1024Wh
- Expansion batteries: Supported through the full SDC port
- Solar connection: Separate compatible DJI solar adapter or charging module
- Drone-specific charging route: Documented model-specific SDC fast-charge cables
Choice B
Anker SOLIX, C1000 Gen 2
C1000 Gen 2
A 24.9-pound 1,024Wh station with a 2,000W inverter, 140W USB-C and a 49-minute app-enabled fast-charge mode.
- Best matched use
- Connect compatible solar through the built-in XT60i input
Checked facts
- Nominal capacity: 1024Wh
- Expansion batteries: Not supported on Gen 2
- Solar connection: Built-in XT60i MPPT input, up to 600W within limits
- Drone-specific charging route: Use the aircraft's compatible charger through a suitable output
Meaningful differences
What changes the fit
| What changes | DJI Power 1000 V2 | Anker SOLIX C1000 Gen 2 | Why it matters |
|---|---|---|---|
| Nominal capacity | 1024Wh | 1024Wh | Neither has a larger base energy store. |
| Expansion batteries | Supported through the full SDC port | Not supported on Gen 2 | Original C1000 expansion bundles do not apply to C1000 Gen 2. |
| Solar connection | Separate compatible DJI solar adapter or charging module | Built-in XT60i MPPT input, up to 600W within limits | Include the required adapter and matching cables in the field kit. |
| Drone-specific charging route | Documented model-specific SDC fast-charge cables | Use the aircraft's compatible charger through a suitable output | DJI cable compatibility is aircraft-specific, rather than universal USB-C charging. |
What you give up
Every choice has a cost
If you choose DJI Power 1000 V2
- Its full SDC port and SDC Lite port cannot be treated as interchangeable.
If you choose Anker SOLIX C1000 Gen 2
- It lacks the DJI SDC direct-charging interface.
Recommendation switch
The decision flips if...
A verified DJI drone cable or expansion battery is central to my plan
Choose DJI Power 1000 V2. Power 1000 V2 supports those documented SDC accessories.
A compatible 600W-or-smaller array and fixed capacity are enough
Choose Anker SOLIX C1000 Gen 2. C1000 Gen 2 includes the solar input and avoids an expansion accessory plan.
What matters in practice
How to make the call
Choose Power 1000 V2 when documented DJI drone-charging cables or future expansion batteries justify its SDC accessory system.
A drone-charging purchase starts with the aircraft model
DJI documents separate SDC fast-charge cables for named aircraft families, including Air 3 and Mavic 3 series. Choose Power 1000 V2 if your exact aircraft and selected cable appear in the compatibility instructions. C1000 Gen 2 remains a candidate when the aircraft's normal charger fits its electrical outputs. Do not assume an SDC cable for one drone fits another, and do not compare charge times without the matching battery, cable and manufacturer conditions.
Solar and expansion can compete for the accessory connection
Power 1000 V2's expansion batteries use its full SDC port. DJI also reserves that port for certain high-power charging accessories, while SDC Lite supports a different subset. Choose DJI when you are willing to verify the complete supported accessory arrangement. Choose Anker when a compatible array within its built-in 600W input is sufficient and expansion is unnecessary. Buying individual compatible accessories does not prove every combination can connect at once.
Equal base capacity means expansion is a future-system choice
Both base stations store 1024Wh. Choosing DJI for expansion does not provide extra runtime until the supported battery and connection hardware are actually purchased. Choosing Anker commits to the fixed base capacity.
What this comparison cannot tell you
- No aircraft charge-time, runtime or noise winner is claimed. No general 2600W US appliance approval is derived from DJI marketing copy.
What the facts say
What the comparison shows
Useful conclusions from the current portable power stations comparison, followed by the checked facts used to reach them.
See the checked facts and calculation notes
| Product | Needs matched | Checked facts | Source records |
|---|---|---|---|
| DJI Power 1000 V2 |
|
| |
| Anker SOLIX C1000 Gen 2 |
|
|
Ready to choose?
Check the price. Read the owner reviews.
Open either model on Amazon to check the current price, customer reviews and delivery options.
DJI Power 1000 V2
Use a documented DJI SDC cable for a compatible aircraft battery
See price & reviews on AmazonAnker SOLIX C1000 Gen 2
Connect compatible solar through the built-in XT60i input
See price & reviews on AmazonLinks open in a new tab.