Main trade-off
Anker SOLIX C1000
It is heavier and has a lower continuous AC rating than C1000 Gen 2. The generations do not share the same expansion path.
Head-to-head
Choose DELTA 3 Plus for two solar inputs and a faster transfer limit. The original C1000 has slightly more stored energy at a similar weight.
Before you choose
For a steady 300W load, Anker SOLIX C1000 models to about 2.8 hours and EcoFlow DELTA 3 Plus to 2.7 hours.
What this is based on
Hours = nominal Wh × 0.8 / 300W. Inputs 1056Wh and 1024Wh. The 80% factor is a shared planning allowance for unusable energy and conversion losses, not a measured efficiency. Idle draw, temperature and the real load change runtime.
Main trade-off
It is heavier and has a lower continuous AC rating than C1000 Gen 2. The generations do not share the same expansion path.
Main trade-off
The 1,800W continuous inverter is lower than C1000 Gen 2 despite a similar 1kWh battery. X-Boost does not change that normal output limit.


Choose DELTA 3 Plus for two solar inputs and a faster transfer limit. The original C1000 has slightly more stored energy at a similar weight.
The extra capacity is too small to dominate
Winner by situation
C1000 has 1,056Wh against 1,024Wh. In the 300W planning example, that is about five extra minutes, so input layout is a more useful deciding factor.
DELTA 3 Plus reaches 1,000W through two 500W inputs. One large panel connection does not automatically unlock the combined rating. C1000 lists 600W total.
The shared planning case gives 2.8 hours from Anker SOLIX C1000 and 2.7 from EcoFlow DELTA 3 Plus. Measure actual wattage before choosing a required overnight reserve.
The maximum input is 600W for Anker SOLIX C1000 and 1000W for EcoFlow DELTA 3 Plus. Compare your actual panel strings with the voltage and current limits as well as this total.
What matters in practice
For a steady 300W load, Anker SOLIX C1000 models to about 2.8 hours and EcoFlow DELTA 3 Plus to 2.7 hours.
Hours = nominal Wh × 0.8 / 300W. Inputs 1056Wh and 1024Wh. The 80% factor is a shared planning allowance for unusable energy and conversion losses, not a measured efficiency. Idle draw, temperature and the real load change runtime.
Anker SOLIX C1000 stores about 37.1 nominal watt-hours per pound, compared with 37.1 for EcoFlow DELTA 3 Plus.
Nominal energy divided by published weight: 1056 / 28.44 and 1024 / 27.6. This compares stored energy per lifting weight, not measured efficiency or handle comfort.
DELTA 3 Plus raises maximum solar intake by about 67% over C1000, while C1000 retains about 3% more nominal battery capacity.
(1000 / 600 - 1) × 100 = 66.7%. (1056 / 1024 - 1) × 100 = 3.1%. DELTA solar total requires both inputs.

Anker SOLIX, A1761
The original C1000 pairs 1,056Wh with an 1,800W inverter and accepts a matching expansion battery. It remains useful if growing the battery matters more than trimming weight.

EcoFlow, DELTA 3 Plus
A 1,024Wh station that puts fast solar recovery and high-power USB-C ahead of headline battery size. Two 500W solar inputs can feed separate panel strings.
Meaningful differences
| What changes | Anker SOLIX C1000 | EcoFlow DELTA 3 Plus | Why it matters |
|---|---|---|---|
| Nominal battery energy | 1056 Wh | 1024 Wh | Stored energy determines the starting runtime budget. |
| Continuous AC output | 1800 W | 1800 W | This is the sustained rating used for load screening, separate from surge and boost modes. |
| Lifting weight | 28.44 lb | 27.6 lb | Wheels help on flat ground. A trunk, step or shelf still requires a lift. |
| Maximum solar input | 600 W | 1000 W | The panel voltage, current and per-port limits must also fit. |
| Dedicated battery expansion | Supported with compatible equipment | Supported with compatible equipment | Charging from an external source is different from integrated battery expansion. |
| Published transfer limit | 20 ms | 10 ms | Verify the exact connected device. A short transfer specification does not guarantee uninterrupted operation for every load. |
What you give up
What matters in practice
C1000 has 1,056Wh against 1,024Wh. In the 300W planning example, that is about five extra minutes, so input layout is a more useful deciding factor.
DELTA 3 Plus reaches 1,000W through two 500W inputs. One large panel connection does not automatically unlock the combined rating. C1000 lists 600W total.
Each supports compatible expansion batteries. Compare the complete future battery and cable plan, because matching watt-hours does not make accessories interchangeable.
What the facts say
Useful conclusions from the current portable power stations comparison, followed by the checked facts used to reach them.
Only 6 of 50 models checked match every need here: “I want power for campsites and weekends away”, “I need backup for household essentials”, and “Solar is a real part of my recharge plan”.
6 matching models from 50 checkedMatch countThe count uses the current product-to-need assignments for “I want power for campsites and weekends away”, “I need backup for household essentials”, and “Solar is a real part of my recharge plan”. A need with no documented match does not count.
| Product | Needs matched | Checked facts | Source records |
|---|---|---|---|
| Anker SOLIX C1000 |
|
|
|
| EcoFlow DELTA 3 Plus |
|
|
|
Ready to choose?
Open either model on Amazon to check the current price, customer reviews and delivery options.

Keep slightly more energy in the base battery
See price & reviews on Amazon
Build a two-input solar setup
See price & reviews on AmazonLinks open in a new tab.