Best for this need

Best 120/240V portable power stations for pumps and home circuits

Our pick

BLUETTI Apex 300

BLUETTI Apex 300

BLUETTI Apex 300 is the lightest native 120/240V starting point here and can grow into a much larger system. EcoFlow DELTA Pro 3 brings about 48 percent more base energy. Anker F3800 Plus brings about 39 percent more. The right pick still starts with the exact receptacle, per-leg current and motor startup your circuit requires.

Why it fits this need

  • Native versus two-unit 240V
  • Per-leg and receptacle amperage
Main trade-off
There are no direct USB or 12V outputs on the base unit. Portable DC use requires the optional DC Hub.
Choose Anker SOLIX F3800 Plus instead when
Choose it when direct RV outlets, 3,200W solar input and more base energy fit the installation better.
More reasons behind this pick
  • Motor-start behavior
  • Transfer panel compatibility

Native split-phase voltage, receptacle amperage and motor startup matter more than total inverter watts.

Analysis updated , Catalog updated , Amazon.com / United States

What the facts say

What the comparison shows

Useful conclusions from the current portable power stations comparison, followed by the checked facts used to reach them.

Compared set

Only 4 of 50 models checked match every need here: “I need native 120V and 240V output”, “I want to feed selected home circuits”, “Solar is a real part of my recharge plan”, and “I want automatic backup for a computer or router”.

4 matching models from 50 checked

Why it helps

BLUETTI Apex 300's battery capacity is 149% above the 1,111 Wh median at 2,764.8 Wh.

BLUETTI Apex 300
2,764.8 Wh
Category median
1,111 Wh
Comparable models
50 of 50
See the checked facts and calculation notes
Compared set
50 models
Source records
6 for the products shown
Catalog updated

Match countThe count uses the current product-to-need assignments for “I need native 120V and 240V output”, “I want to feed selected home circuits”, “Solar is a real part of my recharge plan”, and “I want automatic backup for a computer or router”. A need with no documented match does not count.

Calculation noteThis compares nominal watt-hour capacity. Real delivered energy depends on inverter losses, temperature and load. The median covers 50 of 50 models with comparable published figures.

Facts and source records used for the products in this recommendation
ProductNeeds matchedChecked factsSource records
BLUETTI Apex 300
  • 120V / 240V
  • Circuit backup
  • Faster solar
  • Fast transfer
  • 2,764.8Wh LFP capacity with 3,840W rated and 7,680W surge AC output
  • Native 120/240V output with 30A and 50A connections
  • 2,400W direct solar input and expansion from one unit to a documented multi-unit 58kWh-class system
Anker SOLIX F3800 Plus
  • 120V / 240V
  • Circuit backup
  • Faster solar
  • Fast transfer
  • 3,840Wh LFP capacity with native 120/240V output
  • Two 165V MPPT inputs accept up to 3,200W of solar
  • NEMA TT-30 and L14-30 outlets with expansion to a documented 53.8kWh-class two-unit system
EcoFlow DELTA Pro 3
  • 120V / 240V
  • Circuit backup
  • Faster solar
  • Fast transfer
  • 4,096Wh LFP capacity with 4,000W rated AC output
  • Native 120/240V output and 10ms transfer mode
  • Expandable within EcoFlow’s ecosystem, with configurations documented up to 48kWh

What matters in practice

How to choose for this need

Match voltage, receptacle, per-leg current, neutral and motor startup before comparing battery size. A 240V label alone does not prove a station can run the intended pump or circuit.

01

Apex is the lighter modular base

It supplies native 120/240V from one base unit and weighs about 31 pounds less than DELTA Pro 3 and about 53 pounds less than F3800 Plus. Direct USB and 12V use requires the optional DC Hub.

02

The alternatives start with more energy

EcoFlow has about 48 percent more nameplate energy than Apex. Anker has about 39 percent more. That extends runtime before expansion batteries enter the budget.

03

Motor startup can settle the result

Well pumps, compressors and other inductive loads can ask for a large short burst. Check the exact load, receptacle and per-leg limits instead of comparing only total inverter watts.

04

Circuit integration is professional work

A listed transfer accessory does not make every panel connection safe. Neutral, grounding, interlock and transfer requirements belong in the installation plan with a qualified electrician.

Worked example

Runtime at a steady 500W load

This example uses base capacity and an 85 percent usable-energy allowance.

Formulanominal watt-hours × 0.85 ÷ 500 watts

  • No expansion batteries are connected.
  • The load stays at 500W.
  • DC Hub and panel losses are not added separately.
Runtime at a steady 500W load
ScenarioApex 300F3800 PlusDELTA Pro 3
Estimated runtime4.7 hours6.5 hours7.0 hours

What that meansApex is easier to move, while Anker and EcoFlow provide longer base runtime.

Keep in mindHave a qualified electrician confirm receptacles, per-leg current, neutral, grounding, transfer hardware and motor startup.

Check these before buying

  • Confirm native 240V output and the exact receptacle.
  • Check current available on each leg.
  • Validate startup demand for pumps and compressors.
  • Use approved transfer hardware installed for the circuit.
  • Compare energy, solar input and expansion only after compatibility is proven.

3 options

Our pick and alternatives

01
BLUETTI Apex 300

BLUETTI, Apex 300

Apex 300

A modular 2,764.8Wh station with native 120/240V output, 3,840W power and a path from portable box to multi-unit home system.

Winner whenThe most flexible single-box 120/240V starting point

Decisive facts

  • 2,764.8Wh LFP capacity with 3,840W rated and 7,680W surge AC output
  • Native 120/240V output with 30A and 50A connections

Trade-off

There are no direct USB or 12V outputs on the base unit. Portable DC use requires the optional DC Hub.

02
Anker SOLIX F3800 Plus

Anker SOLIX, F3800 Plus

F3800 Plus

A 3,840Wh native-120/240V system with dual high-voltage solar inputs, RV outlets and a large home-expansion ecosystem.

Choose instead whenChoose it when direct RV outlets, 3,200W solar input and more base energy fit the installation better.

Decisive facts

  • 3,840Wh LFP capacity with native 120/240V output
  • Two 165V MPPT inputs accept up to 3,200W of solar

Trade-off

At 136.7 pounds it needs wheels and a planned installation location. Lifting it into a vehicle is a two-person job.

03
EcoFlow DELTA Pro 3

EcoFlow, DELTA Pro 3

DELTA Pro 3

A refined 4,096Wh wheeled station with 4,000W output, native 120/240V and broad battery, panel and generator integration.

Choose instead whenChoose it for more base energy and a polished home-integration ecosystem after confirming the exact circuit hardware.

Decisive facts

  • 4,096Wh LFP capacity with 4,000W rated AC output
  • Native 120/240V output and 10ms transfer mode

Trade-off

At roughly 115 pounds it is a wheeled home system, not a casual carry, and most circuit-level automation requires additional EcoFlow hardware.

Ready to choose?

Check the price. Read the owner reviews.

Choose instead when

Anker SOLIX F3800 Plus

Anker SOLIX F3800 Plus

Choose it when direct RV outlets, 3,200W solar input and more base energy fit the installation better.

See price & reviews on Amazon