Main trade-off
Roland TD-07DMK
A three-zone ride-bell upgrade uses CR2, so the documented route cannot also connect a second crash.
Head-to-head
Roland TD-07DMK vs Roland TD313: Stereo or separate drum tracks?
The short answer
Choose TD-07DMK when stereo recording and its 47-1/4-inch published width cover the job. Choose TD313 for separate drum-audio tracks or a ride bell without spending the second-crash connection. V31 multitrack audio requires Roland vendor mode and driver. Both exclude the kick pedal and throne. The selected TD313 bundle adds cable, sticks, bag and cloth, not the missing pedal or seat.
Before you choose
The reasoning and the trade-offs
A family computer can decide which recording upgrade is usable
For a quick take to hear back after practice, TD-07DMK records the module as stereo over USB with its vendor driver. TD313 becomes more useful when a musician wants to adjust separate drum-audio tracks after playing. Its V31 exposes 30 recording channels through Roland vendor mode, but generic mode is only stereo and changing modes requires restarting the module. On a shared computer without permission to install a driver, do not buy TD313 expecting immediate multitrack audio. If installation is possible and later mixing is the goal, the change directly addresses that job.
What this is based on
Home recording and control over a shared computer crossed with stereo versus multichannel audio and the required driver state. MIDI software instruments are a separate recording route.
Main trade-off
Roland TD313
Its published setup is 55-1/8 inches wide, and the selected bundle does not include kick pedal or throne.
Manufacturer photo shows an optional double-kick pedal. Kick pedal and throne are sold separately.
Roland TD-07DMK
- Choose it for
- Keep the smaller published layout when headphone practice and a stereo USB take are sufficient, adding a kick pedal and throne.
- Use the spare CR2 connection for another crash if a separate ride bell is not part of the plan.
- Main trade-off
- A three-zone ride-bell upgrade uses CR2, so the documented route cannot also connect a second crash.
Base TD313 kit shown with an optional kick pedal. Bundle cable, sticks, bag and cloth are not pictured. Kick pedal and throne are sold separately.
Roland TD313
- Choose it for
- Record separate drum audio through V31 vendor mode after checking the computer and driver, with kick pedal and throne added.
- Keep the supplied ride bell and add a second crash through its separate connection when a suitable pad, mount and cable are purchased.
- Main trade-off
- Its published setup is 55-1/8 inches wide, and the selected bundle does not include kick pedal or throne.
About this comparison
Roland TD-07DMK vs TD313 for a room shared with a computer. Compare stereo and multitrack audio, ride-bell expansion and the space the kit needs.
These are compact Roland mesh-pad kits with a separate hi-hat controller, built-in phone playback and a kick pedal bought separately. A home player can reasonably weigh the TD-07 package against the newer V31 recording and expansion platform in TD313.
Winner by situation
Start with what you need it to do
The room needs the narrower layout and stereo takes are sufficient
DMK saves about eight inches of published setup width without losing stereo USB audio.
- Roland TD-07DMK
- Better fit
- Roland TD313
- Caution
The recorded kick and snare need separate audio editing afterward
V31 vendor mode supplies multichannel audio. Verify installation and DAW routing first.
- Roland TD-07DMK
- Caution
- Roland TD313
- Better fit
A second crash and a separately triggered ride bell must coexist
TD-07 shares CR2 between those jobs. TD313 keeps a dedicated crash input alongside the supplied ride bell.
- Roland TD-07DMK
- Caution
- Roland TD313
- Better fit
The bundle must include a kick pedal and a seat
Neither selected kit supplies them. TD313 seller extras are cable, sticks, bag and cloth.
- Roland TD-07DMK
- Caution
- Roland TD313
- Caution
What matters in practice
The differences that matter
A family computer can decide which recording upgrade is usable
For a quick take to hear back after practice, TD-07DMK records the module as stereo over USB with its vendor driver. TD313 becomes more useful when a musician wants to adjust separate drum-audio tracks after playing. Its V31 exposes 30 recording channels through Roland vendor mode, but generic mode is only stereo and changing modes requires restarting the module. On a shared computer without permission to install a driver, do not buy TD313 expecting immediate multitrack audio. If installation is possible and later mixing is the goal, the change directly addresses that job.
How we reached this conclusion
Home recording and control over a shared computer crossed with stereo versus multichannel audio and the required driver state. MIDI software instruments are a separate recording route.
The ride-bell upgrade competes with another cymbal on TD-07
A player planning a second crash and a separate ride-bell sound needs to map the inputs before buying pads. On TD-07, the manual connects a CY-13R bell through CR2, which prevents a second-crash pad from using that connection. TD313 already includes a three-zone ride and gives CRASH2 its own jack, so the bell does not consume that later crash route. TD-07DMK remains sufficient if its supplied ride and one extra crash are the intended end point. This is a compatibility choice, not a reason to buy unused cymbals in advance.
How we reached this conclusion
A two-crash arrangement and an independent ride-bell articulation crossed with the shared TD-07 CR2 connection versus V31 dedicated routing. TD-07KV illustration is used only for the shared module rule.
The recording desk still needs space after the new kit arrives
If the desk and drum kit share the same room, the module upgrade comes with a different physical layout. Roland lists TD-07DMK at 47-1/4 inches wide and TD313 at 55-1/8, with both published depths at 43-5/16 inches. Use these as setup references, then check the actual chair, doorway and way into the throne. TD-07DMK can be the practical choice when the narrower arrangement works and stereo takes are enough. If the room accommodates TD313 and its recording or cymbal routing solves a real problem, the extra width may be worth reserving permanently.
How we reached this conclusion
A working desk beside the practice setup crossed with manufacturer playing dimensions. The figures include the specified playing accessories, not packed storage size or guaranteed access clearance.
Choice A
Manufacturer photo shows an optional double-kick pedal. Kick pedal and throne are sold separately.
Roland, TD-07DMK
Roland TD-07DMK
Keep the smaller published layout when headphone practice and a stereo USB take are sufficient, adding a kick pedal and throne.
- Best matched use
- Keep the smaller published layout when headphone practice and a stereo USB take are sufficient, adding a kick pedal and throne.
Checked facts
- Mixing drums after the take: Two-channel USB audio, with vendor driver.
- Ride bell plus another crash: A three-zone CY-13R bell uses CR2 and rules out a simultaneous second-crash pad.
- Width of the published playing setup: 47-1/4 inches, including kick pedal and throne in the dimensions.
- First-day hardware: Kick pad and hi-hat controller supplied. Kick pedal and throne excluded.
Choice B
Base TD313 kit shown with an optional kick pedal. Bundle cable, sticks, bag and cloth are not pictured. Kick pedal and throne are sold separately.
Roland, TD313
Roland TD313
Record separate drum audio through V31 vendor mode after checking the computer and driver, with kick pedal and throne added.
- Best matched use
- Record separate drum audio through V31 vendor mode after checking the computer and driver, with kick pedal and throne added.
Checked facts
- Mixing drums after the take: V31 offers 30 recording channels in vendor mode, or two in generic mode.
- Ride bell plus another crash: Three-zone CY-14R-T supplied, with separate CRASH2 and AUX/TOM4 inputs.
- Width of the published playing setup: 55-1/8 inches, including kick pad, cymbals and throne in the dimensions.
- First-day hardware: KD-10 and FD-9 supplied. Base kit excludes kick pedal and throne.
Meaningful differences
What changes the fit
| What changes | Roland TD-07DMK | Roland TD313 | Why it matters |
|---|---|---|---|
| Mixing drums after the take | Two-channel USB audio, with vendor driver. | V31 offers 30 recording channels in vendor mode, or two in generic mode. | Separate audio tracks need the V31 driver route. A stereo practice recording does not. |
| Ride bell plus another crash | A three-zone CY-13R bell uses CR2 and rules out a simultaneous second-crash pad. | Three-zone CY-14R-T supplied, with separate CRASH2 and AUX/TOM4 inputs. | The planned cymbal combination matters more than a general expansion label. |
| Width of the published playing setup | 47-1/4 inches, including kick pedal and throne in the dimensions. | 55-1/8 inches, including kick pad, cymbals and throne in the dimensions. | Check the remaining desk and door space before choosing the larger layout. |
| First-day hardware | Kick pad and hi-hat controller supplied. Kick pedal and throne excluded. | KD-10 and FD-9 supplied. Base kit excludes kick pedal and throne. | The selected TD313 bundle extras do not remove these two hardware purchases. |
What you give up
Every choice has a cost
If you choose Roland TD-07DMK
- Moving from a finished stereo take to separate module-audio tracks would require a different recording route or module.
If you choose Roland TD313
- The driver-free USB mode stays stereo, and one digital pad input does not support three simultaneous digital upgrades.
Recommendation switch
The decision flips if...
The room is tight and finished stereo takes meet the recording need
Choose Roland TD-07DMK. TD-07DMK keeps the smaller layout, provided its cymbal routing is enough.
Separate drum audio or the combined ride-bell and second-crash plan is essential
Choose Roland TD313. TD313 removes those documented TD-07 limits, with driver setup and additional hardware still required.
What matters in practice
Before you choose
The smaller setup can cover simple practice takes, while separate audio tracks and a ride-bell expansion plan can justify the wider TD313.
What this comparison cannot tell you
- Multichannel audio is not available in V31 generic mode.
- No sound-quality or noise ranking is claimed.
- TD313 has one digital-pad input, not three.
- Roland says NEQ-K and NEQ-H cannot be used with TD313.
What the facts say
What the comparison shows
Useful conclusions from the current electronic drum kits comparison, followed by the checked facts used to reach them.
See the checked facts and calculation notes
| Product | Needs matched | Checked facts | Source records |
|---|---|---|---|
| Roland TD-07DMK |
|
| |
| Roland TD313 |
|
|
Ready to choose?
Check the price. Read the owner reviews.
Open either model on Amazon to check the current price, customer reviews and delivery options.
Manufacturer photo shows an optional double-kick pedal. Kick pedal and throne are sold separately.
Roland TD-07DMK
Keep the smaller published layout when headphone practice and a stereo USB take are sufficient, adding a kick pedal and throne.
Use the spare CR2 connection for another crash if a separate ride bell is not part of the plan.
See price & reviews on AmazonBase TD313 kit shown with an optional kick pedal. Bundle cable, sticks, bag and cloth are not pictured. Kick pedal and throne are sold separately.
Roland TD313
Record separate drum audio through V31 vendor mode after checking the computer and driver, with kick pedal and throne added.
Keep the supplied ride bell and add a second crash through its separate connection when a suitable pad, mount and cable are purchased.
See price & reviews on AmazonLinks open in a new tab.