Main trade-off
GE ADHE25BWF
The 8.5-pint bucket can require attention. It needs substantial open airflow around the cabinet.
Head-to-head
Choose GE ADHE25BWF when floor depth during use matters more than stored height. GE is 3.6 inches shallower, while Cube nests to 13.39 inches high. Choose Midea Cube 20 when low seasonal storage and verified app access are more useful. Its nested size must not be mistaken for the full space needed for ordinary extended bucket operation. Neither model includes an internal pump.
Before you choose
Cube nests about six inches lower than the GE body, which can help seasonal storage under a suitable shelf. Its 13.5-inch-square base is still 3.6 inches deeper than GE. In a small apartment where the machine stays in a walkway for months, operating floor space may matter more than packed height. If it comes out only seasonally, nesting can become the stronger benefit. Keep the extended bucket position, lifting room and each manual’s air clearances out of the storage-only measurement.
What this is based on
19.4 - 13.39 equals 6.01 inches stored-height difference. 13.5 - 9.9 equals 3.6 inches depth difference. Stored and operating states are kept separate.
Main trade-off
The 8.5-pint bucket can require attention. It needs substantial open airflow around the cabinet.
Main trade-off
The 13.5-inch-square base is deeper than GE, and the nested height is not the ordinary extended operating height.


GE ADHE25BWF vs Midea Cube 20 MAD20S1QWT for a small home and seasonal storage. Compare floor space, lift-and-twist access and remote controls.
Both are smaller room units with modest extraction ratings. Their different cabinet designs make this a realistic choice for a home that also needs to store the appliance between seasons.
Winner by situation
GE is 3.6 inches shallower before clearance.
Cube nests lower and has verified app control.
Neither has an internal pump.
They weigh about 33 lb each. Cube’s lower nested height does not establish a lighter appliance.
What matters in practice
Cube nests about six inches lower than the GE body, which can help seasonal storage under a suitable shelf. Its 13.5-inch-square base is still 3.6 inches deeper than GE. In a small apartment where the machine stays in a walkway for months, operating floor space may matter more than packed height. If it comes out only seasonally, nesting can become the stronger benefit. Keep the extended bucket position, lifting room and each manual’s air clearances out of the storage-only measurement.
19.4 - 13.39 equals 6.01 inches stored-height difference. 13.5 - 9.9 equals 3.6 inches depth difference. Stored and operating states are kept separate.
If the unit sits in a spare room while you work or sleep elsewhere, Cube’s verified app can make settings and status easier to reach. That convenience does not imply stronger extraction or effortless care. Its 20-pint rating is lower than GE’s 25, and neither has a pump for an elevated sink. Where a downhill hose can be installed safely, remote checks become more useful because the disposal task is already handled. Without that route, keep a realistic bucket routine whichever shape you prefer.
Remote controls crossed with room separation and shared non-pump drainage. Extraction rating is not transformed into measured speed.
Midea lists the complete Cube 20 at 33.07 lb, almost the same as GE’s 33 lb. Nesting changes storage height, not the mass that has to go upstairs or onto a shelf. If seasonal storage involves lifting, allow for the whole appliance and follow the instructions for emptying and handling it. The Cube’s lift-and-twist layout is a storage advantage only when that movement and the storage location are practical for the person using it.
33.07 versus 33 lb complete weights crossed with nested storage and a lifting task. No detached component weight, safe-lifting threshold or effort estimate inferred.

GE, ADHE25BWF white 25-pint standard
Less cabinet depth helps an occupied room and the 25-pint rating suits the job.

Midea, MAD20S1QWT
The appliance must pack lower between seasons and its lift-and-twist handling is practical for you.
Meaningful differences
| What changes | GE ADHE25BWF | Midea Cube 20 Pint | Why it matters |
|---|---|---|---|
| Removal rating | 25 pints per day | 20 pints per day | Choose for conditions, not a guaranteed time difference. |
| Body base | 13.2 W × 9.9 D inches | 13.5 W × 13.5 D inches | Cube uses more floor depth despite its low nested shape. |
| Stored height | 19.4 inches | 13.39 inches nested | Cube is about six inches lower when nested for storage. |
| Remote checks and drainage | Local controls, no pump | SmartHome app, no pump | App access is useful only alongside a workable disposal routine. |
What you give up
Recommendation switch
Choose GE ADHE25BWF. GE has the shallower cabinet.
Choose Midea Cube 20 Pint. Cube provides nesting and verified SmartHome control.
What matters in practice
You want a small dehumidifier, but the shape that stores neatly may use more floor space when it is needed.
What the facts say
Useful conclusions from the current dehumidifiers comparison, followed by the checked facts used to reach them.
| Product | Needs matched | Checked facts | Source records |
|---|---|---|---|
| GE ADHE25BWF |
|
| |
| Midea Cube 20 Pint |
|
|
Ready to choose?
Open either model on Amazon to check the current price, customer reviews and delivery options.

Less cabinet depth helps an occupied room and the 25-pint rating suits the job.
You prefer a conventional cabinet without relying on nested storage.
See price & reviews on Amazon
The appliance must pack lower between seasons and its lift-and-twist handling is practical for you.
Verified remote controls are useful and a suitable gravity route is available if avoiding bucket chores.
See price & reviews on AmazonLinks open in a new tab.