Main trade-off
Midea Cube 35 Pint
Nested height does not describe extended operation
Head-to-head
Choose Midea Cube 35 Pint when compact nested storage is the main constraint and its capacity suits the room. Choose Frigidaire FHDD5034Y1 when its documented 49.71-pint certification and conventional body better fit your moisture load. Both support app control and gravity drainage. Frigidaire's large bucket can become a substantial carrying load.
Before you choose
An emptied Cube fits under a 20-inch storage shelf by its 14.57-inch nested height, while Frigidaire's 24.7-inch body does not. A shallow cupboard can reverse the preference because Frigidaire is 12.2 inches deep versus Cube's 14.45. Choose Cube for low storage and Frigidaire for a shallower footprint when the other dimensions fit. Neither example authorizes running a dehumidifier inside a closed cupboard.
What this is based on
These comparisons use bare-body dimensions. Cube must be assessed in its extended operating state with the required air clearances, so its nested height cannot prove operating fit.
Main trade-off
Nested height does not describe extended operation
Main trade-off
A full bucket contains about 22.5 lb of water


Compare Midea Cube 35 Pint and Frigidaire FHDD5034Y1 for storage shape, bucket carrying, gravity drainage and remote operation.
Winner by situation
Cube's nested height is 14.57 inches. Frigidaire is 24.7 inches high.
Cube is 14.45 inches deep and Frigidaire 12.2 inches, before allowing for attachments.
Both documented configurations rely on gravity for continuous drainage.
Use drainage or empty early. A full Frigidaire bucket exceeds that water-only limit, and Cube's exact full-water load is not established here.
What matters in practice
An emptied Cube fits under a 20-inch storage shelf by its 14.57-inch nested height, while Frigidaire's 24.7-inch body does not. A shallow cupboard can reverse the preference because Frigidaire is 12.2 inches deep versus Cube's 14.45. Choose Cube for low storage and Frigidaire for a shallower footprint when the other dimensions fit. Neither example authorizes running a dehumidifier inside a closed cupboard.
These comparisons use bare-body dimensions. Cube must be assessed in its extended operating state with the required air clearances, so its nested height cannot prove operating fit.
Frigidaire holds 2.7 US gallons, which is about 22.5 lb of water when full before the bucket itself is counted. That may reduce visits but can make carrying water upstairs impractical. Choose it with a permitted gravity drain or a plan to empty earlier if lifting is limited. Cube also lacks a pump, so its app cannot solve a higher sink. The drainage route matters more than remote controls in that situation.
2.7 multiplied by approximately 8.34 lb per US gallon gives 22.5 lb. This is water-only mass and does not compare the Cube's unverified tank volume.
Frigidaire publishes 47, 49 and 51 dBA across its fan settings, but the reviewed evidence does not assign the certified 49.71-pint removal rate to every setting. Choose it when the documented capacity fits your load and test whether the intended setting maintains humidity. Cube's 35-pint manufacturer rating may suffice for a smaller load. Neither the difference in capacity labels nor the app support proves which is quieter at equal moisture removal.
The sound table lacks a paired capacity-at-speed table, and Cube's current 35-pint maker rating is not presented as a same-procedure certification result.

Midea, MAD35S1QWT
The middle Cube balances useful daily capacity with a large adjustable reservoir and connected controls.

Frigidaire, FHDD5034Y1
A polished large-room choice with strong airflow, a 2.7-gallon tank and current efficiency data.
Meaningful differences
| What changes | Midea Cube 35 Pint | Frigidaire 50 Pint Wi-Fi Dehumidifier | Why it matters |
|---|---|---|---|
| Capacity basis | The exact manufacturer model table rates 35 pints per day. | Exact-model certification lists 49.71 pints per day and 2.01 L/kWh under Appendix X1. | The maker's 35-pint rating and Frigidaire's exact certification are separately labeled. |
| Storage shape | Published nested dimensions are 14.76 inches wide, 14.45 deep and 14.57 high. | The body is 15.9 inches wide, 12.2 deep and 24.7 high, weighing 41 lb. | Cube stores lower, while Frigidaire is shallower front to back. |
| Body weight | Published body weight is 39.62 lb. | The body is 15.9 inches wide, 12.2 deep and 24.7 high, weighing 41 lb. | Machine weight does not include a full collected-water load. |
| Drainage and controls | There is no built-in pump. | The manufacturer documents Wi-Fi app controls and continuous gravity drainage. | App control does not give either unit a built-in uphill drain. |
What you give up
Recommendation switch
Choose Midea Cube 35 Pint. Use SmartHome controls without requiring a pump. Nested height does not describe extended operation.
Choose Frigidaire 50 Pint Wi-Fi Dehumidifier. Keep a conventional body with an explicitly specified 2.7-gallon bucket. A full bucket contains about 22.5 lb of water.
What matters in practice
What the facts say
Useful conclusions from the current dehumidifiers comparison, followed by the checked facts used to reach them.
| Product | Needs matched | Checked facts | Source records |
|---|---|---|---|
| Midea Cube 35 Pint |
|
| |
| Frigidaire 50 Pint Wi-Fi Dehumidifier |
|
|
Ready to choose?
Open either model on Amazon to check the current price, customer reviews and delivery options.

Store an emptied unit in its lower nested form
See price & reviews on Amazon
Use the documented 49.71-pint certified rating
See price & reviews on AmazonLinks open in a new tab.