Main trade-off
Bambu Lab P2S Combo
Its build envelope is unchanged from the P1S, so larger parts do not gain room.
Head-to-head
Bambu Lab P2S Combo vs Bambu Lab P1S Combo: The P2S upgrade does not fit a larger part
The short answer
Choose the P2S for the controls and extrusion updates, with the same part-size limit.
Before you choose
The reasoning and the trade-offs
A 246mm plate with a 5mm brim
The required 256 × 256mm footprint fits P2S Combo and fits Bambu Lab P1S Combo. This particular size check does not separate them.
What this is based on
Assume a square 246mm part with a 5mm brim on every side. Required width and depth = 246 + 2 × 5 = 256mm. Compare each axis with the published build dimensions. Purge towers, supports and machine exclusion zones need separate space.
Main trade-off
Bambu Lab P1S Combo
Its shared nozzle purges filament during color changes.
Bambu Lab P2S Combo
- Choose it for
- You want hardened extrusion hardware and a touchscreen
- You want AMS 2 Pro included for supplied filament system
- Main trade-off
- Its build envelope is unchanged from the P1S, so larger parts do not gain room.
Bambu Lab P1S Combo
- Choose it for
- The original P1S workflow already meets your needs
- You want Original AMS in this Combo record for supplied filament system
- Main trade-off
- Its shared nozzle purges filament during color changes.
About this comparison
Compare P2S Combo and P1S Combo by part size, material temperatures and the supplied color-printing setup before choosing your printer.
Choose the P2S for the controls and extrusion updates, with the same part-size limit.
Winner by situation
Start with what you need it to do
A flat 246mm part needing a 5mm brim
The required 256 × 256mm footprint fits P2S Combo and fits Bambu Lab P1S Combo. This particular size check does not separate them.
- Bambu Lab P2S Combo
- Better fit
- Bambu Lab P1S Combo
- Better fit
A material workflow that requires active chamber heat
The P2S and P1S are enclosed, but neither compared record documents a separately controlled active chamber heater. A workflow requiring active chamber heat needs another validated option.
- Bambu Lab P2S Combo
- Caution
- Bambu Lab P1S Combo
- Caution
The supplied feeder and enclosure must cover the first project
P2S Combo includes AMS 2 Pro, while this P1S Combo record includes the original AMS. Both are enclosed, but the supplied feeder generation must match the exact listing.
- Bambu Lab P2S Combo
- Depends
- Bambu Lab P1S Combo
- Depends
An abrasive-material plan can change the first purchase
The P2S includes hardened nozzle and extruder hardware. A P1S with its supplied stainless nozzle needs the appropriate hardware change before a filament profile requiring a hardened nozzle is eligible.
- Bambu Lab P2S Combo
- Better fit
- Bambu Lab P1S Combo
- Caution
What matters in practice
The differences that matter
A 246mm plate with a 5mm brim
The required 256 × 256mm footprint fits P2S Combo and fits Bambu Lab P1S Combo. This particular size check does not separate them.
How we reached this conclusion
Assume a square 246mm part with a 5mm brim on every side. Required width and depth = 246 + 2 × 5 = 256mm. Compare each axis with the published build dimensions. Purge towers, supports and machine exclusion zones need separate space.
Batch layout for 50mm square fixtures
A simple grid holds 16 footprints on P2S Combo and 16 on Bambu Lab P1S Combo. Use this as a plate-layout screen before running the actual slicer.
How we reached this conclusion
Assume 50mm square footprints plus 10mm allowance per grid cell for spacing. Count = floor(build X / 60) × floor(build Y / 60). No rotation, supports, purge tower or brim is modeled. This estimates layout, not throughput.
An abrasive-material plan can change the first purchase
The P2S includes hardened nozzle and extruder hardware. A P1S with its supplied stainless nozzle needs the appropriate hardware change before a filament profile requiring a hardened nozzle is eligible.
How we reached this conclusion
Eligibility follows the material profile requirement and supplied nozzle material. No wear-life or print-speed multiplier is inferred.
Choice A
Bambu Lab, P2S Combo
P2S Combo
An enclosed 256mm CoreXY printer with AMS 2 Pro, a touchscreen and hardened extrusion hardware. The added controls and drying system improve the ownership workflow while keeping the familiar P-series build size.
- Best matched use
- Enclosed four-color printing with active filament drying
Checked facts
- 256 × 256 × 256mm build envelope
- 300°C nozzle and 110°C bed maximum
- Enclosure without a documented active chamber heater
- AMS 2 Pro included
Choice B
Bambu Lab, P1S Combo
Bambu Lab P1S Combo
The printer provides 256 × 256 × 256 mm build volume. The print area is enclosed.
- Best matched use
- print in four colors and print functional parts fast
Checked facts
- The printer provides 256 × 256 × 256 mm build volume.
- The print area is enclosed.
- The compared material path covers pla, abs.
- Automatic setup features are documented for first-print preparation.
Meaningful differences
What changes the fit
| What changes | Bambu Lab P2S Combo | Bambu Lab P1S Combo | Why it matters |
|---|---|---|---|
| Bed temperature ceiling | 110°C | 100°C | Check the required bed setting separately from the nozzle setting. |
| Supplied filament system | AMS 2 Pro included | Original AMS in this Combo record | This changes the accessory bill and material-change process. |
| On-machine controls | 5-inch touchscreen | 2.7-inch button-controlled screen | This changes direct setup and monitoring interaction. |
| Monitoring hardware | 1080p live view with error detection | 720p camera with low-frame-rate monitoring | Camera resolution and detection features do not guarantee every failure is caught. |
| Supplied nozzle hardware | Hardened steel nozzle and extruder gears | Stainless steel supplied nozzle | Check abrasion resistance and replacement assemblies for the exact filament. |
What you give up
Every choice has a cost
If you choose Bambu Lab P2S Combo
- A single nozzle still purges between incompatible colors. The enclosure has no separately regulated active chamber heater.
If you choose Bambu Lab P1S Combo
- The chamber is enclosed but not actively heated.
Recommendation switch
The decision flips if...
You want hardened extrusion hardware and a touchscreen
Choose Bambu Lab P2S Combo. P2S supplies hardened nozzle and extrusion hardware plus a 5-inch touchscreen. Its 256 mm cube is unchanged, so this choice addresses operation and compatible materials.
The original P1S workflow already meets your needs
Choose Bambu Lab P1S Combo. The selected P1S Combo has the original AMS and a 256 mm cube. Keep it in consideration when its controls and supplied hardware meet the intended material profiles.
What matters in practice
How to make the call
Check the actual model dimensions
Both printers use a 256mm cube. The P2S is a workflow upgrade, so a part that is too large for the P1S remains too large here.
Follow the material requirements
The P2S supplied hardened nozzle and gears reduce the need to change parts for supported abrasive filaments. The P1S supplied stainless nozzle must be checked against the exact material.
Compare the complete working setup
Compare the exact AMS bundle. This P1S record refers to the original Combo, while the P2S includes AMS 2 Pro. Bambu also sells newer P1S bundles, so a generic Combo label is insufficient.
What this comparison cannot tell you
- Published speed ceilings do not predict a finished-part time.
- Temperature headroom is a capability check and does not certify material compatibility.
- Nominal build volume excludes clearance needed for purge towers, supports and certain machine routines.
What the facts say
What the comparison shows
Useful conclusions from the current 3D printers comparison, followed by the checked facts used to reach them.
Compared set
8 of 23 models checked match every need here: “Print functional parts fast” and “Print in four colors”.
8 matching models from 23 checkedSee the checked facts and calculation notes
Match countThe count uses the current product-to-need assignments for “Print functional parts fast” and “Print in four colors”. A need with no documented match does not count.
| Product | Needs matched | Checked facts | Source records |
|---|---|---|---|
| Bambu Lab P2S Combo |
|
|
|
| Bambu Lab P1S Combo |
|
|
|
Ready to choose?
Check the price. Read the owner reviews.
Open either model on Amazon to check the current price, customer reviews and delivery options.
Bambu Lab P2S Combo
You want hardened extrusion hardware and a touchscreen
See price & reviews on AmazonBambu Lab P1S Combo
The original P1S workflow already meets your needs
See price & reviews on AmazonLinks open in a new tab.